Numerical Simulation on Vortical Structures of Electrolyte Flow Field in Large Aluminium Reduction Cells
LI Jie,ZHANG He-hui,ZHANG Hong-liang,XU Yu-jie,YANG Shuai,LAI Yan-qing
DOI: https://doi.org/10.19476/j.ysxb.1004.0609.2012.07.030
2012-01-01
The Chinese Journal of Nonferrous Metals
Abstract:In view of the characteristics of the rotation flow of the melt in aluminum reduction cells,the methods of vorticity and swirling strength were introduced to analyze the vortical structures of aluminum reduction cells quantitatively.Based on the software CFX12,the electrolyte flow field in a 300 kA cell was numerically simulated.The results show that the maximum swirling strengths on the interpolar horizontal plane and the vertical cross-section plane of the anode gap are 1.611 and 1.961 s-1 respectively,and the maximum absolute vorticities are 4.002 and 3.391 s-1,respectively.Small vortexes occur as reverse symmetrical pairs around the anode because of the stirring of anode gas,while large asymmetric vortexes are caused under some anodes by the nonuniformity of electromagnetic forces(EMFs).The alumina feeding points should be set at the intersection position of center channel and anode slots to achieve the best mixing effect of alumina,where the absolute vorticity is greater than 4 s-1.Thus,the above method can provide more flow field information with higher precision and theoretical guidance for the structural design of the cell.