Abstract:During aluminium electrolysis, a ledge of frozen electrolytes is generally formed, attached to the sides of the cells. This ledge acts as a protective layer, preventing erosion and chemical attacks of both the electrolyte melt and the liquid aluminium on the side wall materials. The control of the sideledge thickness is thus essential in ensuring a reasonable lifetime for the cells. The key property for modelling and predicting the sideledge thickness as a function of temperature and electrolyte composition is the thermal conductivity. Unfortunately, almost no data is available on the thermal conductivity of the sideledge. The aim of this work is to alleviate this lack of data. For seven different samples of sideledge microstructures, recovered from post-mortem industrial electrolysis cells, the thermal diffusivity, the density, and the phase compositions were measured in the temperature range of 423 K to 873 K. The thermal diffusivity was measured with a laser flash technique and the average phase compositions by X-ray diffraction analysis. The thermal conductivity of the sideledge is deduced from the present experimental thermal diffusivity and density, and the thermodynamically assessed heat capacity. In addition to the present experimental work, a theoretical model for the prediction of the effective thermal transport properties of the sideledge microstructure is also proposed. The proposed model considers an equivalent microstructure and depends on phase fractions, porosity, and temperature. The strength of the model lies in the fact that only a few key physical properties are required for its parametrization and they can be predicted with a good accuracy via first principles calculations. It is shown that the theoretical predictions are in a good agreement with the present experimental measurements.

3D Thermo-electric of 160 Ka Prebaked AluminumReduction Cell at Low Cryolitic Ratio and Temperature

Towards Feasible Temperature Management and Thermo-Mechanical Stability of Carbon-Assisted Solid Oxide Electrolysis Cell

Numerical Study on Heat and Ion Transport Characteristics Enables Optimal Design of Aqueous Thermocells for Low-Grade Heat Recovery

Electro-Thermal Modeling of a Hollow Structure Design of Cylindrical Lithium-Ion Battery

Numerical Simulations and Thermal Diagnostic of Ledge Formation in Hall–Heroult Aluminum Electrolysis Cell with a Solidification Front at the Cryolite-Metal Baths Interface for Reduction of Heat Losses

Simulation Study of Ferricyanide/Ferrocyanide Concentric Annulus Thermocell with Different Electrode Spacing and Cell Direction

Analysis of 3D Thermo - Electric Field Potential for 300 Ka Aluminum Electrolysis Cell Using ANSYS

Fully-Coupled Electric-Thermal-Flow Modeling and Investigation of Dynamic Thermal-Ledge Behavior in Aluminum Electrolysis Cell

Improved CFD Modeling of the Whole-Cell Side Ledge Behavior in Aluminum Electrolysis Cell

A 3-D Numerical Model to Predict Low Temperature Aluminum Electrochemical Process Using Ionic Liquids as Electrolytes at Different Boundary Conditions

Influences of various aluminum accumulation sump designs on thermal stress distribution in drained aluminum reduction cell

Thermo-mechanical Studies of Thimble Geometry and Stub Materials for Voltage Drop Across the Anode-Rod Connection in Aluminum Electrolysis Cell

Thermal Behavior of the early Life of an Aluminum Electrolysis Cell

High-performance cryo-temperature ionic thermoelectric liquid cell developed through a eutectic solvent strategy

Reduction of the Operating Temperature of Aluminum Electrolysis: Low Temperature Electrolyte

Relationship Between Aluminium Electrolysis Current Efficiency and Operating Condition in Electrolyte Containing High Concentration of Li and K

Thermal Designing of an Inner Cathode Type Alkali Metal Thermal to Electric Conversion (AMTEC) Cell

Thermal conductivity of the side ledge in aluminium electrolysis cells: compounds as a function of temperature and grain size

Thermal Conductivity of Compounds Present in the Side Ledge in Aluminium Electrolysis Cells

High‐Efficiency Cryo‐Thermocells Assembled with Anisotropic Holey Graphene Aerogel Electrodes and a Eutectic Redox Electrolyte

Thermal conductivity of the sideledge in aluminium electrolysis cells: Experiments and numerical modelling