Abstract:The uniformity of the cell size of aluminum foams prepared by traditional melt foaming and gas injection methods is difficult to control. In order to improve the controllability of cell size and mechanical performance of aluminum foam, an A356 matrix syntactic foam was prepared by the improved stir casting process. Moreover, the compressive property of the syntactic foam was studied and compared with other metal foams. Al2O3 hollow spheres with the diameters of 3-5mm were added in the molten A356 alloy, then the syntactic foam can be obtained after stirring and compaction. The hollow spheres in the syntactic foam are random loose packed. The volume fraction of 3-3.5 mm hollow spheres in the syntactic foam could reach to 56%. The total densities of the syntactic foams are around 1.79 g/cm(3). Through the analysis both in macroscopic and microscopic, the interfacial bonding between aluminum matrix and hollow spheres was proved to be good even after mechanical cutting. The quasi-static compression result showed that the plateau stress of the syntactic foam with 3-3.5mm hollow spheres could reach up to 46 MPa, and the corresponding densification strain energy is 20 MJ/m(3). Moreover, the plateau region is flat, long and relatively high. The syntactic foam with the hollow spheres of 3-4 mm diameter has the highest overall porosity and the best compressive performance. Compared with other traditional aluminum foams, this syntactic foam has advantages in energy absorption performance and the adjustability of cell size.

Fabrication and compressive properties of K405 alloy hollow sphere foams

Microstructure and Compressive Properties of Inco-617 Alloy Hollow Sphere Foam

Fabrication and Mechanical Properties of INCO-617 Alloy Hollow Sphere Particles

Preparation and Compressive Performance of an A356 Matrix Syntactic Foam

Microstructure and Compressive Properties of Aluminum Foams Made by 6063 Aluminum Alloy and Pure Aluminum

Fabrication and Compressive Behavior of Open-Cell Aluminum Foams Via Infiltration Casting Using Spherical CaCl2 Space-Holders

Solidification Structure and Sound Absorbability of A356 Alloy Foams

Compressive behavior and energy absorption analysis of casting skin-wrapped aluminum foams

High Strain Rate Compression of Cenosphere-Pure Aluminum Syntactic Foams

Microstructure and compression behavior of cenosphere filled aluminum syntactic foams

Quasi-static Deformation Mechanism and Compressive Properties of Aluminum Foams Fabricated by Friction Stir Processing

Properties of Aluminum Foam Prepared by Gas Injection Method

Compression Behaviors of Cenosphere–pure Aluminum Syntactic Foams

Fabrication of Mg-Al Alloy Foam with Close-Cell Structure by Powder Metallurgy Approach and Its Mechanical Properties

Interface characterization and mechanical property of an aluminum matrix syntactic foam with multi-shelled hollow sphere structure

Low-Temperature Reactive Sintered Porous Mg-Al-Zn Alloy Foams

Aluminum Foam Sandwich: Pore Evolution Mechanism Investigation and Engineering Preparing Optimization

Compressive Behaviour of Open Cell Al–Al2O3 Composite Foams Fabricated by Sintering and Dissolution Process

Lightweight epoxy foams prepared with arranged hollow-glass-microspheres/epoxy hollow spheres

Compressive Property and Energy Absorption Characteristic of 3D Open-Cell Ni–Cr–Fe Alloy Foams under Quasi-Static Conditions

Hollow glass microspheres/phenolic syntactic foams with excellent mechanical and thermal insulate performance