Abstract:In this paper, novel syntactic foams (CPSFs) composed of the rigid polyurethane foam (PUR) and the fly ash cenospheres were prepared through the pressure infiltration approach. The aluminum honeycombs were proposed to improve the mechanical response of CPSFs by internally restricting the lateral deformation. The influences of the cenospheres size and the reinforcement on the dynamic behavior of the CPSFs were specified. The dynamic compression tests were carried out for the plain and Al honeycomb reinforced CPSFs with the strain rate ranging from 0.001/s to 2000/s. The results shown that the dynamic strength of the CPSFs containing large cenospheres was 35%–77% higher than that under quasi-static compression. But, the plateau stress was insensitive to the strain rate because the main failure mechanism of the CPSFs at different stages was dominated by different material compositions. The dynamic compressive strength and plateau stress of the plain CPSFs containing small cenospheres shown obvious strain rate sensitivity. The failure mechanism of the two plain CPSFs both transformed from shear failure into longitudinal cracking with the loading condition changed from the quasi-static to high-velocity impact. For the reinforced CPSFs, the dynamic mechanical properties including the strength and the plateau stress were sensitive to the strain rate. The failure mode of the reinforced CPSFs was dominated by the gradual compressive deformation. It was suggested that the Al honeycombs can not only enhance the mechanical properties, but also improve the dynamic response of the CPSFs. As a consequence, the dynamic energy absorption of the CPSFs varied in the range of 7–14 MJ/m3, and was about 23%–32% higher than that under static compression. This study expects to provide a potential approach in disposing the industrial waste and an innovation to adopt the internal constraints to improve mechanical behaviors of syntactic foams.

Compression Behaviors of Cenosphere–pure Aluminum Syntactic Foams

Deformation and energy absorption properties of cenosphere/aluminum syntactic foam-filled circular tubes under lateral quasi-static compression

Deformation and energy absorption properties of cenosphere-aluminum syntactic foam-filled tubes under axial compression

Compressive Behavior of Lightweight Concrete Using Aerogel-Reinforced Expanded Polystyrene Foams

Effect of the cenospheres size and internally lateral constraints on dynamic compressive behavior of fly ash cenospheres polyurethane syntactic foams

Preparation and Compressive Performance of an A356 Matrix Syntactic Foam

Mechanical Response of the Fly Ash Cenospheres/polyurethane Syntactic Foams Fabricated Through Infiltration Process

Bending behavior of cenosphere aluminum matrix syntactic foam-filled circular tubes

Preparation and Tensile-compressive Properties of Syntactic Foams of Epoxy Resin Filled with Fly Ash Cenospheres

Effects of Cenosphere on the Mechanical Properties of Cement-Based Composites

An investigation into low-velocity impact behavior of functionally graded treated and untreated cenosphere-based syntactic foams

Experimental Study of the Mechanical Properties and Microstructures of Lightweight Toughness Cement-Based Composites

Modelling the dynamic compressive response of syntactic foam with hierarchical cell structure

Compressive Properties and Energy Absorption of Aluminum Foams with a Wide Range of Relative Densities

Effects of cell wall property on compressive performance of aluminum foams

Quasi-static Deformation Mechanism and Compressive Properties of Aluminum Foams Fabricated by Friction Stir Processing

Influence of axial compressive loads on buckling and free vibration response of surface-modified fly ash cenosphere/epoxy syntactic foams

Boosting energy absorption performance of aluminum matrix syntactic foam with carbon coated glass cenospheres

Quasi-static compressive properties and damage behavior of aluminum matrix syntactic composites with different diameters of glass cenospheres

Compressive Behavior and Failure Mechanisms of Freestanding and Composite 3D Graphitic Foams

Compressive behavior and energy absorption analysis of casting skin-wrapped aluminum foams