Abstract:<p>In this work, we fabricated metal-diamond composite material with excellent mechanical properties via pressure-less microwave sintering by using pre-alloyed metallic powder as the raw materials. The elementary substance metallic powder formula was simultaneously sintered as a comparative test. A scanning electron microscope (SEM) was used to analyze the microstructural morphology information of samples. Phase transitions were studied by an X-ray diffraction (XRD) technique. The hardness, bending strength and relative density of samples were tested to evaluate their mechanical properties. Raman spectroscopy was used to investigate the diamond graphitization. The results show that the formula of pre-alloyed metallic powder exhibited better heating efficiency under the microwave irradiation; in turn, the samples can reach targeted sintering temperature ahead of the elementary substance metallic powder samples. Furthermore, the samples sintered via pre-alloyed powders display excellent mechanical properties; the relative density, hardness and bending strength can reach 98.8%, 101.5 HRB and 1065.9 MPa, respectively. This promotional behavior can be attributed to the pre-alloyed characteristic of raw powders that facilitates the uniform distribution of metal elements and a more thorough alloying reaction even if the sintering temperature is below 900 °C. It is demonstrated that the pressure-less microwave sintering will be feasible in the fabrication of metallic matrix diamond super-hard tool bits by utilizing the pre-alloyed powders as the raw material. The combination of microwave sintering and pre-alloyed powder is expected to provide a new strategy with efficient and low cost for the preparation of super-hard material products.</p>

Al-Sn Pre-Alloyed Powders and Its Application in Diamond Grinding Wheel

Manufacture of A New Kind Diamond Grinding Wheel with Al-Based Bonding Agent

Manufacture of a new style diamond grinding wheel with Al-based bonding matrix

The Fabrication of Porous Metal-Bonded Diamond Coatings Based on Low-Pressure Cold Spraying and Ni-Al Diffusion-Reaction

Comparative study on NiAl and FeAl intermetallic-bonded diamond tools and grinding performance for Si3N4 ceramic

Microstructure of Al-based Bonding Agent Diamond Tool

A comparative study on FeAl and NiAl bonded diamond tools for dry grinding based on wear characteristics at elevated temperature

Application of Al-based diamond grinding wheel in squaring ceramic tiles

Mechanical Alloying of Copper- or Iron-Based Metallic Binders for Diamond Tools

Preparation and performance of high entropy alloy reinforced Cu-based bond diamond tool

Enhancement of Wear Properties of Ultrafine-Structured Al–Sn Alloy-Embedded Sn Nanoparticles Through in Situ Synthesis

Wear Behavior of Al–Sn Alloys with Different Distribution of Sn Dispersoids Manipulated by Mechanical Alloying and Sintering

Improving wear performance of dual-scale Al–Sn alloys by adding nano-Si@Sn: Effects of Sn nanophase lubrication and nano-Si polishing

Characterization of pre-alloyed TiAl powder and its microstructure characteristics after hot-pressing

Tribological properties of Al/diamond composites produced by cold spray additive manufacturing

The role of pre-alloyed powder combined with pressure-less microwave sintering on performance of superhard materials

Preparation and properties of Al flakes and Al/Mg alloy powder

Synthesis of Nano-phase Composite Al-Sn Alloy by Reaction Ball Milling Process and Its Performance

Promoting the High Load-Carrying Capability of Al–20 Wt%sn Bearing Alloys Through Creating Nanocomposite Structure by Mechanical Alloying

Preparation, sintering behavior and microstructure of Al2O3-Coated Ni powders

Microstructure and Wear Properties of Al-Based Bearing Alloys Fabricated by Mechanical Alloying