Abstract:Brazed monolayer diamond grinding wheels have advantages of a high abrasive bonding strength, high protrusion, and a large chip disposal space. However, it is difficult to prepare ordered and fine-grained brazed diamond grinding wheels. This study presents a new method for grain-arranged, brazed diamond grinding wheels with microtextures with similar performance to ordered and fine-grained brazed diamond grinding wheels. First, coarse diamond grains (18/20 mesh) were orderly brazed to fabricate the end grinding wheels. Next, a series of microtextures were ablated on the diamond grains using a pulsed laser, and two types of textured end grinding wheels-TG-G (ablated microgrooves only) and TG-GH (ablated microgrooves and microholes)-were prepared. Then, an experiment involving the grinding of alumina ceramics was performed, and the grinding characteristics and grinding mechanism were analyzed. The results indicated that compared with untextured diamond end grinding wheels (TG), the textured diamond grinding wheels (TG-G and TG-GH) significantly reduced the grinding force and the roughness of the machined surface. The local stress concentration at the microtextures promoted the formation of microcracks in the diamond grains of TG-G and TG-GH, and the self-sharpness of the grinding wheel was significantly improved. The brittle fracture mode of ceramic materials in grinding included intergranular fracture and transgranular fracture. Ironing pressure action was a key material-removal mechanism. It had an important influence on the cutting force and plasticity characteristics of the TG machined surface. For the surfaces processed by TG-G and TG-GH, the effect of ironing was weakened, while shearing played a more important role. The TG-GH grinding wheel ablated with microgrooves and microholes was superior to the TG-G grinding wheel ablated with only microgrooves, with regard to the grinding force, roughness, and self-sharpening.

Manufacture of a new style diamond grinding wheel with Al-based bonding matrix

A comparative study on FeAl and NiAl bonded diamond tools for dry grinding based on wear characteristics at elevated temperature

Comparative study on NiAl and FeAl intermetallic-bonded diamond tools and grinding performance for Si3N4 ceramic

Sintering, microstructure, and mechanical properties of vitrified bond diamond composite

Fabrication and performance evaluation of metal bond diamond tools based on aluminothermic reaction

The Fabrication of Porous Metal-Bonded Diamond Coatings Based on Low-Pressure Cold Spraying and Ni-Al Diffusion-Reaction

Grinding of alumina ceramic with microtextured brazed diamond end grinding wheels

Study on process and manufacturability of metal-bonded diamond grinding wheel fabricated by selective laser melting (SLM)

Fabrication of Vitrified Bond Diamond Grinding Wheel via LCD Photopolymerization

Porous Structure Design and Fabrication of Metal-Bonded Diamond Grinding Wheel Based on Selective Laser Melting (SLM)

Preparation of New Al Based Complex Bonded Diamond Composite

Structure Formation of Diamond-Containing Coatings during Sintering of Specially-Shaped Grinding Wheels

Morphological evolution and grinding performance of vitrified bonded microcrystal alumina abrasive wheel dressed with a single-grit diamond

Study on grinding nickel-based superalloy GH4169 with ceramic bond CBN wheel controlling abrasive orientation by magnetic field

Stereolithography 3D printing gyroid triply periodic minimal surface vitrified bond diamond grinding wheel

Study on grinding of SiCp/Al composites by micro-textured monolayer brazed diamond wheel

Research on the bonding properties of vitrified bonds with porous diamonds and the grinding performance of porous diamond abrasive tools

Diamond parameter design and assessment of a novel 3D printed diamond grinding wheel with linear cooling channels

Improvement in Hardness and Wear Behaviour of Iron-Based Mn–Cu–Sn Matrix for Sintered Diamond Tools by Dispersion Strengthening

Variations in structure and properties of vitrified bonds and vitrified diamond composites prepared by sol-gel and melting methods at different sintering temperature

Influence of sintering temperature on dicing performances of metal-bonded diamond blades on sapphire