Abstract:Brazed monolayer diamond grinding wheels have advantages of a high abrasive bonding strength, high protrusion, and a large chip disposal space. However, it is difficult to prepare ordered and fine-grained brazed diamond grinding wheels. This study presents a new method for grain-arranged, brazed diamond grinding wheels with microtextures with similar performance to ordered and fine-grained brazed diamond grinding wheels. First, coarse diamond grains (18/20 mesh) were orderly brazed to fabricate the end grinding wheels. Next, a series of microtextures were ablated on the diamond grains using a pulsed laser, and two types of textured end grinding wheels-TG-G (ablated microgrooves only) and TG-GH (ablated microgrooves and microholes)-were prepared. Then, an experiment involving the grinding of alumina ceramics was performed, and the grinding characteristics and grinding mechanism were analyzed. The results indicated that compared with untextured diamond end grinding wheels (TG), the textured diamond grinding wheels (TG-G and TG-GH) significantly reduced the grinding force and the roughness of the machined surface. The local stress concentration at the microtextures promoted the formation of microcracks in the diamond grains of TG-G and TG-GH, and the self-sharpness of the grinding wheel was significantly improved. The brittle fracture mode of ceramic materials in grinding included intergranular fracture and transgranular fracture. Ironing pressure action was a key material-removal mechanism. It had an important influence on the cutting force and plasticity characteristics of the TG machined surface. For the surfaces processed by TG-G and TG-GH, the effect of ironing was weakened, while shearing played a more important role. The TG-GH grinding wheel ablated with microgrooves and microholes was superior to the TG-G grinding wheel ablated with only microgrooves, with regard to the grinding force, roughness, and self-sharpening.

A comparative study on FeAl and NiAl bonded diamond tools for dry grinding based on wear characteristics at elevated temperature

Comparative study on NiAl and FeAl intermetallic-bonded diamond tools and grinding performance for Si3N4 ceramic

Fabrication and performance evaluation of metal bond diamond tools based on aluminothermic reaction

Experimental Investigation of Aluminum Nitride Ceramics Based on Compliant Finishing Process

The Fabrication of Porous Metal-Bonded Diamond Coatings Based on Low-Pressure Cold Spraying and Ni-Al Diffusion-Reaction

Grinding of alumina ceramic with microtextured brazed diamond end grinding wheels

Experimental and numerical characterization of abrasive belt wear and debris formation during dry grinding of nickel-based superalloys with diamond abrasive belts

Fabrication and evaluation of high-entropy alloy reinforced Fe bond diamond tool

Mechanisms of abrasive wear in the grinding of titanium (TC4) and nickel (K417) alloys

Wear Properties of NiAl Based Materials

Investigation on abrasive wear of electroplated diamond belt in grinding nickel-based superalloys

Grinding of Ti2AlNb intermetallics using silicon carbide and alumina abrasive wheels: Tool surface topology effect on grinding force and ground surface quality

A comparative study on tribological behavior of Al2O3, AlN, Si3N4 and ZrO2 ceramics sliding against polycrystalline diamond ball

Grinding performance of electroplated diamond tools strengthened with Cr-C deposit using D-150 diamond particles

Study on grinding of SiCp/Al composites by micro-textured monolayer brazed diamond wheel

Comparative investigation on wear behavior of brown alumina and microcrystalline alumina abrasive wheels during creep feed grinding of different nickel-based superalloys

Investigation of Friction and Wear Behavior of NiAl-based Alloys at Room Temperature

Grinding performance evaluation of SiC ceramic by bird feather-like structure diamond grinding wheel

Self-sharpening property of porous metal-bonded aggregated cBN wheels during the grinding of Ti–6Al–4V alloys

Process parameter optimization and surface integrity evolution in the high-speed grinding of TiAl intermetallics based on grey relational analysis method

Research on the bonding properties of vitrified bonds with porous diamonds and the grinding performance of porous diamond abrasive tools