Abstract:The cast Al-3Li-2Cu-0.15Zr alloy is a promising material due to its high strength-to-weight ratio and stiffness. In this work, the Sn addition and heat treatment were employed to regulate its microstructure and mechanical properties. The results indicate that Sn exists in the matrix as Sn solute atoms and Sn-rich particles including Li5Sn2, Li13Sn5, Li7Sn2, and Li22Sn5. The number of these particles increases as the Sn content rises. The addition of Sn significantly enhances the grain refinement, reducing the average grain size to 50.2 mu m when 0.3 wt% Sn is incorporated. During the aging process, the 8 ' and 8'/beta ' precipitates gradually grow and coarsen, while the T1 and 0 ' precipitates nucleate and grow. Some 8 ' precipitates attach to the board of 0 ' to form sandwich-like phases, such as 8'/0'/8'. The addition of Sn promotes the nucleation of 0 ' and T1 precipitates. This is achieved by leveraging the Sn-rich particles as nucleation sites and utilizing Sn solute atoms to decrease the interface energy between these precipitates and alpha-Al. Moreover, the addition of Sn with a high vacancy binding energy and the reduction of aging temperature can effectively decrease the diffusion rate of Li atoms and vacancies, thereby inhibiting the broadening of the 8 '-PFZ. After a suitable heat treatment, the Sn-modified Al-Li alloy exhibits a microstructure characterized by fine and equiaxed grain, fine and uniform 8 ' precipitates, and a narrow 8 '-PFZ, contributing to excellent mechanical properties of the alloy. Significantly, the underlying mechanisms behind the aforementioned observations were discussed analytically.

Enhancement of Wear Properties of Ultrafine-Structured Al–Sn Alloy-Embedded Sn Nanoparticles Through in Situ Synthesis

Improving wear performance of dual-scale Al–Sn alloys by adding nano-Si@Sn: Effects of Sn nanophase lubrication and nano-Si polishing

A remarkable enhancement of mechanical and wear properties by creating a dual-scale structure in an Al–Sn–Si alloy

Improving Wear Performance of Dual-Scale Al–Sn Alloys: the Role of Mg Addition in Enhancing Sn Distribution and Tribolayer Stability

Promoting the High Load-Carrying Capability of Al–20 Wt%sn Bearing Alloys Through Creating Nanocomposite Structure by Mechanical Alloying

Significant Improvement of Wear Properties by Creating Micro/nano Dual-Scale Structure in Al–Sn Alloys

Microstructure and Wear Properties of Al-Based Bearing Alloys Fabricated by Mechanical Alloying

Wear Behavior of Al–Sn Alloys with Different Distribution of Sn Dispersoids Manipulated by Mechanical Alloying and Sintering

Enhancing microstructural, tribological and corrosion responses of Al–Zn–Mg–Cu alloy via nano-/micro-Al2O3 particulates

Effect of Alloying Elements on the Dry Sliding Wear Characteristics of Gravity-Cast Mg-Sn Based Alloys

Improving wear performance of CuSn5Bi5 alloys through forming self-organized graphene/Bi nanocomposite tribolayer

Effect of Sn addition on the tribological behaviors of CoCrFeNi high entropy alloys

In Situ Formation of Al2O3–SiO2–SnO2 Composite Ceramic Coating by Microarc Oxidation on Al–20%Sn Alloy

Minimizing Tribolayer Damage by Strength–ductility Matching in Dual-Scale Structured Al–Sn Alloys: A Mechanism for Improving Wear Performance

Synthesis of Nano-phase Composite Al-Sn Alloy by Reaction Ball Milling Process and Its Performance

Regulating the Microstructure and Mechanical Properties in Cast Al–3Li–2Cu-0.15Zr Alloy Via Sn Addition and Heat Treatment

Improving the Mechanical Properties and Intergranular Corrosion Resistance of Al-9.2Mg-0.8Mn-0.2Zr Alloy by Sn Addition

Tribological Behavior of Plasma Sprayed Al–Cu–Fe + Sn Quasicrystalline Composite Coatings

Significant Reduction in Friction and Wear of an Ultrafine-Grained Single-Phase FeCoNi Alloy Through the Formation of Nanolaminated Structure

Synergetic Enhancements on the Mechanical and Tribological Performance of Al10Cr17Fe20NiV4 Medium‐Entropy Alloys Induced by Nano‐Al2O3 Particles

Simple Synthesis of the Composite Coating and the Lubrication Mechanisms of the Spherical SnAgCu–Al2O3