Abstract:The method established previously for studying the etching rates of micro-scale silicon and silica was used to study the etching process of silicon and silica on the Si(100) surface. Photolithography was used to pattern a positive photoresist mask to confine the etching area, and the atomic force microscopy was used to probe the etched surface. The lateral etching rate of silicon or silica on the silicon surface was defined, and the lateral and longitudinal etching rates of silicon and silica on the Si(100) surface in 40% ammonium fluoride aqueous solution were measured. The effect of the dissolved oxygen on the etching rates was studied by bubbling the solution with high purity nitrogen. The lateral and longitudinal etching rates of silicon and silica on the (100) surface increase with temperatures except for the lateral etching rate of silica in a N-2-bubbled solution which probably reaches the limit of diffusion controlled reaction. The etching rates of silicon and thermal silica on the Si(100) surface show remarkable difference with that on the Si (111) surface in both air-saturated and N-2-bubbled solutions. The apparent activation energies for the silicon and silica etching processing in ammonium fluoride solution were obtained from the etching rates at different temperatures in the range 20.6 similar to 34.1degreesC. The similarity of the apparent activation energies for the etching processing of silicon and silica on the (100) surface to that on the (111) surface probably suggests that the rate-determined-step is the same in both cases. A lot of gas bubbles are seen to aggregate on the surface in silicon dissolution process at 38.2degreesC, and it is found that the gas bubbles have great influence on the silicon etching rate. The formation of bubbles accelerates the silicon dissolution at the beginning but blocks the etching as the bubbles gradually aggregate on the surface.

Anisotropic etching of silicon in alkaline solutions : Microscopic activation energy calculations for silicon atoms and its simulation applications

The Dissociated Amorphous Silica Surface: Model Development and Evaluation.

Simulation of Anisotropic Chemical Etching of Single Crystalline Silicon using Cellular-Automata

Anisotropic etching of Si

Anisotropic Etching of Three-Dimensional Shapes in Silicon - the Important Role of Galvanic Interaction

Simulation of Anisotropic Etching of Silicon using a Cellular Automata Model

Orientation dependent etching of silicon by fluorine molecules: a quantum chemistry computational study

Simulation of anisotropic chemical etching of crystalline silicon using a cellular automata model

Atomistic description of Si etching with HCl

A 3-D Simulator for Silicon Anisotropic Wet Chemical Etching Process Based on Cellular Automata

Orientation-dependent surface morphology of crystalline silicon during anisotropic etching using a continuous cellular automaton

A cellular automaton-based simulator for silicon anisotropic etching processes considering high index planes

A new theory for the anisotropic etching of silicon and some underdeveloped chemical micromachining concepts

Etching Mechanisms of CF3Etching Fluorinated Si: Molecular Dynamics Simulation

Atomistic understanding of interfacial processing mechanism of silicon in water environment: A ReaxFF molecular dynamics simulation

Anisotropic Effects in Local Anodic Oxidation Nanolithography on Silicon Surfaces: Insights from ReaxFF Molecular Dynamics

Simulation of three-dimensional etch profile of silicon during orientation dependent anisotropic etching

Level Set Approach to Anisotropic Wet Etching of Silicon

Simulation of two-dimensional etch profile of silicon during orientation-dependent anisotropic etching

Molecular Dynamics Study of Interaction between Fluorine Atoms and Silicon Surface

The Lateral and Longitudinal Etching Rates of Silicon and Silica on Si(100) Surface