Abstract:The high voltage bushing on the grid side of UHV converter transformer is located at the connection position between the grid side winding of converter transformer and the AC side system, which is the key equipment of UHVDC transmission system. In actual operation, the bushing will bear high temperature, large load current and additional load for a long time. In addition, due to the limitation of process level. During the rolling process of bushing capacitor core, there are inevitably some defects such as plate wrinkle, plate offset and unreliable grounding of the end plate. Under the long-term action of electricity, heat and stress, small defects are likely to develop into larger defects or even cause faults. Therefore, it is of great significance to study the influence of different defects on the electric field distribution in the bushing core and the partial discharge initial voltage (PDIV) of the bushing. On the basis of 550kV capacitive bushing, this paper designed and manufactured four scaled models. The rated working voltage of scaled models are 31.8kV. And the corresponding finite element simulation models are also established. The simulation results show that the wrinkle defect and offset defect will cause serious electric field distortion, resulting in a sharp increase of electric field at the defect. Ungrounded defects will completely change the distribution of electric field in the bushing, making the electric field concentrated in the insulating oil between the flange and the end plate. The measurement of PDIV shows that the wrinkle defect and offset defect can significantly reduce the PDIV which makes the bushing prone to PD at a lower voltage level and lead to fault. The initial voltage drop of ungrounded partial discharge is less, but the discharge amount is large. Therefore, the research of this paper has guiding significance for timely finding the original defects of bushing, preventing the development of defects, and solving the problem of frequent failure of converter bushing.

Effects of Typical Defects on Electrical Fields in High-Voltage (Storage) Capacitors

Modeling And Simulation Of Inner Defect In Impulse Storage Capacitor

An Investigation on the Evolution of Insulation Performance of BOPP Films for Power Capacitors under Multi Physical Fields Aging

Study on the Failure Factors of Composite Insulation in High-Voltage Storage Capacitors

DCPD Investigation on Inner and Oiliness Defects of High-Voltage Storage Capacitors

Analysis of Electric Field Distribution in Capacitors’ Dielectric with Cavities

Electric Field Simulation of Typical Defects in the Epoxy/Paper Composites Insulated Tubular Bus

Electric field distribution characteristics of composite insulator with internal defect

Study on the Formation of Capacitor Screen Deformation of Dry-type DC Bushing Core and Its Effect on Electric Field Distribution

Influence of Defects on the Electric Field Distribution of ±800kV Butt-type DC Wall Bushing

Electrical Treeing: A Phase-Field Model

Degradation Behavior and Mechanism of Metalized Film Capacitor under Ultrahigh Field

Pattern Recognition of Typical Defects in High-Voltage Storage Capacitors Based on Dc Partial Discharge

Phase-Field Modeling of Electromechanical Breakdown in Multilayer Ceramic Capacitors

Research on Typical Decay-like Fracture Defects of Composite Insulators Based on Electro-Thermal Coupling

Influence of Typical Defects on Insulation and Gas Production Characteristics of Oil-Impregnated Paper Bushing

Influence Analysis on Defects in Bushing Core at Grid Side of Converter Transformer

Calculation of Electric Field in Safety Film Capacitors

The mechanism of high voltage storage capacitor under large impulse discharge

Simulation Study of Electric Influence Caused by Defects on Uhv Ac Gis Spacer

Kerr Electro-Optic Effect-Based Methodology for Measuring and Analyzing Electric Field Distribution in Oil-Immersed Capacitors