Abstract:A novel micro-electromechanical systems inertial switch based on non-silicon surface micromachining technology has been designed, fabricated and characterized in the present work. Compared with the traditional inertial switch, a compliant cantilever beam as a stationary electrode has been proposed to prolong the contact time, which can realize sufficient elastic deformation during the contact between the electrodes. The dynamic contact process is analyzed theoretically and the corresponding mechanical impact mechanism is also explained. To investigate the contact-enhancing mechanism of the cantilever beam, the switch applied half-sine acceleration with various amplitudes in the sensitive direction is simulated with ANSYS software. The dynamic simulation results confirm the contact-enhancing mechanism described by the theoretical analysis and it is shown that the contact time (i.e., the switch-on time) can be prolonged effectively by utilizing the elastic deformation of the cantilever beam and increased with the applied accelerations. The inertial switch is successfully fabricated by electroplating and sacrificial layer processes technologies. The prototype has been characterized by dropping hammer experiment. The test results indicate that the contact effect is improved significantly and the contact time is ∼80 µs under the 297 g acceleration, and the maximum value is ∼410 µs for the 672 g acceleration amplitude, which is in general accordance with the simulated results. The mechanical contact between the cantilever beam and the proof mass is evaluated following thousands of impacts. The scanning electron micrographs of the contact surfaces indicate that the all-metal switch still keeps a good mechanical property after suffering the hot contact, and the contact resistance is also stable.

A Novel Design and Fabrication of MEMS Electrical Inertia Micro-switch

A laterally-driven micromachined inertial switch with a compliant cantilever beam as the stationary electrode for prolonging contact time

Multi-physics Analysis of an Electrostatically Actuated Microcantilever in Viscous Fluids

A Low-g MEMS Inertial Switch Based on Direct Contact Sensing Method

Inertial Micro-Switch Capable of Prolonging Contact Time

Micro-cantilever Shocking-Acceleration Switches with Threshold Adjusting and ‘On’-State Latching Functions

A Novel Acceleration Switch with Hat-Like Contact Separated from Proof Mass

Design, simulation, and testing of a tunable MEMS multi-threshold inertial switch

Design of A Novel Bulk Micro-Machined Rf Mems Switch

An Acceleration Switch with A Robust Latching Mechanism and Cylindrical Contacts

A Latching Acceleration Switch with Cylindrical Contacts Independent to the Proof-Mass

Design, Simulation, and Fabrication of a New Three-Axis Inertial Switch with a Triangular Movable Electrode Structure

Micromachined Inertial Switch for Sub‐g Monitoring Using Gravity‐based Threshold Compensation

Novel Multicontact Radio Frequency Microelectromechanical System Switch in High-Power–handling Applications

Design, Fabrication and Characterization of A Latching Acceleration Switch with Multi-Contacts Independent to the Proof-Mass

Study on opto-thermal drive micro-switch fabricated based on LIGA technology

Design and Fabrication of a Novel MEMS Relay with Low Actuation Voltage.

The Design, Simulation and Fabrication of an Omnidirectional Inertial Switch with Rectangular Suspension Spring

Fabrication of a Micromachined Capacitive Switch Using the CMOS-MEMS Technology

A Micro-wires Based Tactile Sensor for Prosthesis.

Design and Experimental Validation of A Restoring Force Enhanced Rf Mems Capacitive Switch with Stiction-Recovery Electrodes