Abstract:White organic light-emitting diodes (OLEDs) have been attracted much attention due to the potential applications in illumination light source and back light for liquid crystal display (LCD) as well as full color displays. A general solution to realizing white color OLEDs is to use separate multiple emitter-layers to produce different colors. The white light is achieved based to the color mixing. Unfortunately,the electroluminescent (EL) performances of this kind of devices such as color stability and efficiency still need improved. An optical microcavity has a structure with at least one space dimension on the order of optical wavelength. In a microcavity device,only one or a few optical modes are able to interact with the materials inside. Thus,the interaction between material and light within microcavity is greatly changed comparing with the condition of free space. To obtain white light in MOLED,a multimode within the emission spectrum of the wide-band emitter is essential,and can be realized by charging cavity length. However,for the white MOLED with multiple layer structure,the EL performances were seldom reported. We report the realization of a bright white MOLED with a simple two-layer structure and only one emitter layer.An microcavity organic light-emitting diode (MOLED) was developed to emit white light. The MOLED was designed and fabricated with a simple structure of glass/DBR/ITO(194 nm)/NPB(93 nm)/Alq3(49 nm)/MgAg(150 nm). White light was observed based to the emission of two cavity modes despite only one emitter layer. By well adjusting the resonance wavelength (488 and 612 nm) and intensity,the two cavity modes give rise to a bright,white electroluminescene emission with a maximum luminance of 16 435 cd/m2,maximum luminous efficiency of 11.1 cd/A. At the typical luminance of 100 cd/m2,the luminous efficiency,voltage and current density are 9 cd/A,6 V and 1.2 mA/cm2 for the MOLED device,respectively. The MOLED has a CIE chromaticity coordinate of (0.32,0.34),which is very stable under different applied voltage. The result indicated that microcavity is an efficient structure to construct white OLED.

The Microcavity Organic Light Emitting Device Based on Metal Induced Crystallized Poly-crystalline Si Film Anode

A Poly-Crystalline Si Anode Microcavity Organic Light Emitting Device and Its Simplified Preparation Process Flow

Study of a New Type Anode of OLED by MIC Poly-Si

Tricolor Microcavity Oleds Based On P-Nc-Si:H Films As The Complex Anodes

Poly-Si Film Functional Layer Based AM-OLED Display Panel

Efficient Organic Light-Emitting Diodes Using Polycrystalline Silicon Thin Films As Semitransparent Anode

An Efficient Top-Emitting Electroluminescent Device on Metal-Laminated Plastic Substrate

High Efficiency Red Organic Light-Emitting Diodes Based on Microcavity Structure

Color Tunable High Efficiency Microcavity Organic Light-Emitting Diodes

Design Simulation and Preparation of White OLED Microdisplay Based on Microcavity Structure Optimization

Efficient 1.54μm Light Emitting Diode with Nanometer Thick Polycrystalline Si Anode and Organic Sandwich Structure

Organic Microcavity Green Color Light Emitting Diode

Experimental study of the organic light emitting diode with a p-type silicon anode

Optimizing Efficiency of Polycrystalline P-Si Anode Organic Light-Emitting Diode

Top-Emission Si-Based Phosphor Organic Light Emitting Diode With Au Doped Ultrathin N-Si Film Anode And Bottom Al Mirror

Robust Laminated Anode with an Ultrathin Titanium Nitride Layer for High-Efficiency Top-Emitting Organic Light-Emitting Diodes

Study on Metal Microcavity OLEDs with Improved Efficiency

Tunable, Narrow, and Enhanced Electroluminescent Emission from Porous-Silicon-reflector-based Organic Microcavities

High-Efficiency Microcavity Top-Emitting Organic Light-Emitting Diodes Using Silver Anode

Design and Fabrication of Organic Light-emitting White-color Microcavity Device

P‐124: Efficiency Enhanced Top Emitting OLED‐on‐Silicon Microdisplay with Aluminum Anode