Abstract:Gamma imager capable of monitoring, detection and localization of radioactive sources is of critical importance for nuclear safety and homeland security with the increasing use of radioactive sources in applications of nuclear technology. A 4π view gamma imager based on gamma ray occlusion technique is under development in our lab. The key component of the gamma imager is a 3D position-sensitive detector, which enables 4π field of view of the imager. In this work, we propose a 3D positionsensitive detector design for the 4π view gamma imager based on dual-ended readout (DER) technique. The detector was composed of a GAGG block coupled to an SiPM array at both crystal ends. DOI calibration was conducted with a collimated fan beam 18F source and DOI resolution was evaluated. Energy calibration was performed for each 3D position region of the detector by incorporating 3D position information to correct for the energy response inconsistency at different 3D position regions inside the detector. Various radioisotopes including 99mTc, 131I, 137Cs and 22Na were tested. An exponential factor was applied to compensate for energy response non-linearity due to SiPM saturation effect at higher gamma energy. The measured average DOI resolution was 1.96 ± 0.21 mm for all the four DER detector modules, indicating excellent 3D positioning accuracy of the detector design. With the proposed energy calibration approach, characteristic photopeaks of each radioisotope can be clearly identified at the correct energy position on the measured energy spectra. The achieved energy resolution was 9.76% at 662 keV, demonstrating good energy performance of the detector design, which could benefit radioisotope identification capability of the gamma imager. To conclude, the proposed 3D position-sensitive detector design based on DER technique features good 3D positioning and energy performance and is feasible for the 4π view gamma imager.

The Construction of a Two-Dimensional Position Sensitive X-ray Detector

Design and Experimental Study of a Two-Dimensional Position Sensitive X-ray Detector

Fabrication and Characterization of Two-Dimensional Pin-Cushion Position Sensitive Detectors

Fabrication and characterization of a new type 4 × 4 arrayed position sensitive detector

Fabrication and Characterization of a New Type 4×4 Arrayed Position-Sensitive Detector

The Current-position Characteristics of Two Dimensional Positio n Sensitive Detectors with Different Anode Structure

Design Realization and Characterization of A Position Sensitive Detector for Fast Optical Measurement

Experimental Study of a Two-dimensional MWPC

Construction of a two-dimensional thermal neutron detector

Two-dimension Delay-Line Microchannel Plate Imaging Detector

Development of Si Multi-Strip Bi-Dimension Position Sensitive Detectors

Developments of a 2D position sensitive neutron detector

X-ray Single-Pixel Imaging with MPGD-based detectors

Ultrathin and Ultrasensitive Direct X‐ray Detector Based on Heterojunction Phototransistors

Design of Solid-State Detector Modules for High Energy X-ray Imaging

2-mm-Thick Large-Area CdTe Double-sided Strip Detectors for High-Resolution Spectroscopic Imaging of X-ray and Gamma-ray with Depth-Of-Interaction Sensing

Design and Development of a 3D Position-Sensitive Detector for 4π View Gamma Imager Based on Dual-Ended Readout Technique

Studies of A Solid Detector Array for High Energy X-Ray Imaging System Based on Ma-Pmt

AN X-RAY DETECTOR WITH MULTIPLE SCREEN-CCD SENSORS FOR IMAGING SYSTEM

A Position Sensitive Scintillation Detector Using a Side-by-side GAGG-F/GAGG-T Phoswich Block

Development Of Low Pressure Position Sensitive Multiwire Proportional Chamber