Abstract:Three-dimensional numerical simulation was conducted to investigate the flow field and heat transfer performance of the Cross-Wavy Primary Surface (CWPS) recuperators; for microturbines. Using high-effective compact recuperators to achieve high thermal efficiency is one of the key techniques in the development of microturbine in recent years. Recuperators need to have minimum volume and weight, high reliability and durability. Most important of all, they need to have high thermal-effectiveness and low pressure-losses so that the gas turbine system can achieve high thermal performances. These requirements have attracted some research efforts in designing and implementing low-cost and compact recuperators for gas turbine engines recently. One of the promising techniques to achieve this goal is the so-called primary surface channels with small hydraulic dimensions. In this paper, we conducted a three-dimensional numerical study of flow and heat transfer for the Cross-Wavy Primary Surface (CATS) channels with two different geometries. In the CWPS configurations the secondary flow is created by means of curved and interrupted surfaces, which may disturb the thermal boundary layers and thus improve the thermal performances of the channels. To facilitate comparison, we chose the identical hydraulic diameters for the above four CWPS channels. Since our experiments on real recuperators showed that the Reynolds number ranges from 150 to 500 under the operating conditions, we implemented all the simulations under laminar flow situations. By analyzing the correlations of Nusselt numbers and friction factors vs. Reynolds numbers of the four CWPS channels, we found that the CWPS channels have superior and comprehensive thermal performance with high compactness, i.e., high heat transfer area to volume ratio, indicating excellent commercialized application in the compact recuperators.

Creep Analysis Of Cross Wavy Primary Surface Recuperator For Microturbine System

Creep analysis for Cross Wavy primary surface recuperator in 100 kw microturbine system

Three-Dimensional Stress Analysis And Configuration Optimization Of Cross Wavy Primary Surface Recuperator For Microturbine System

Finite Element Analysis of Stress on Cross-Wavy Primary Surface Recuperator Based on Thermal-Structural Coupling Model

Configuration Optimization of Cross Wave Primary Surface Sheet in the Recuperator Using Particle Swarm Algorithm

Stress Analysis of Surface Type Recuperator in a Micro-gas Turbine System

Creep life assessment of aero-engine recuperator based on continuum damage mechanics approach

Experimental Investigation on Heat Transfer and Pressure Drop in a Microtubine Recuperator with Cross-Wavy Primary Surface Channels

Strength Analysis of High-temperature Creep for a 660MW Ultra-Supercritical Steam Turbine High-pressure Rotor

An Assessment Method of High Temperature Creep Life of Steam Turbine Diaphragm

Revealing influence of warm bending on creep performance of heat-resistant 2.25Cr-1Mo-0.25 V steel

Machine Learning-Assisted Probabilistic Creep Life Assessment for High-Temperature Superheater Outlet Header Considering Material Uncertainty

Low Cycle Fatigue and Creep Fatigue Interaction Behavior of 9Cr-0.5Mo-1.8w-v-nb Heat-Resistant Steel at High Temperature

Analysis of the Creep Mechanism of Low-Alloy Steel in Terms of Plastic Deformation

Study on Reliability of High Temperature Heat Exchangers

Analysis Of High Temperature Creep On The Nut Connection Components Of A 600mw Supercritical Steam Turbine

Experimental Investigation on Creep Behaviors and Life Prediction Across Phase-Transformation of Thermal Aged 16MND5 Steel

Experimental Investigation of Thermal and Hydrodynamic Performances of a Partial Cross-Wavy Recuperator for Microturbine Applications

Numerical Simulation Of Gas Flow And Heat Transfer In Cross-Wavy Primary Surface Channel For Microtubine Recuperators

Stress relief investigation using creep model considering back stress in welded rotor

Creep behavior analysis on ruptured welds of heat-resistant steels with two different failure modes