Abstract:To maintain safety and reliability in power plants, creep-life prediction models have received much attention over the years. This article was designed to focus on the conditions when a material structure is exposed to extremely high temperatures and pressures with the help of finite element analysis. A direct comparison of the feasibility of different models' fitness and suitability in predicting creep damage was presented in this article by simulating the damage evolution of a uniaxial SS-304 specimen under a pre-defined load, using established constitutive creep models. Comparative assessments of minimum creep strain rate, creep deformation, and stress rupture were demonstrated using the Norton–Bailey (NB), Kachanov–Rabotnov (KR), Theta projection (TP), and sine-hyperbolic (SH) models while standardizing them with the Omega model. The FE results of a dog-bone specimen, while implementing the models, were compared with the actual creep experiment results to check for the models' reliability and validation. Subsequently, sensitivity studies of the established creep models were conducted using the statistical tools RSM and ANOVA, with an analysis of how the parameters for operation, design, and material dependency came into effect. Thus, quantitative and qualitative correlation analyses of the FE creep response for these five established models were conducted together, resulting in finalizing the selection of the most suitable model, the sine-hyperbolic model, for the SS-304 material under the defined boundary conditions. The 0.84 R2 value of the sine-hyperbolic model proved the model's selection for predicting the creep response of stainless steel 304. The method can be applied to select a suitable creep damage model as per the feasibility of the operating conditions.

Analysis Of High Temperature Creep On The Nut Connection Components Of A 600mw Supercritical Steam Turbine

Study on Creep Behavior and Fracture Life Prediction Method of P92 Steel Based on Finite Element Analysis

FEM-based Multi-field Coupling Stress Analyses of the Cylinder-bolts System in a Gas Turbine Power Plant

Machine Learning-Assisted Probabilistic Creep Life Assessment for High-Temperature Superheater Outlet Header Considering Material Uncertainty

Creep Rupture Limit Analysis for Engineering Structures under High-Temperature Conditions

Low Cycle Fatigue and Creep Fatigue Interaction Behavior of 9Cr-0.5Mo-1.8w-v-nb Heat-Resistant Steel at High Temperature

CREEP DEFORMATION ANALYSIS OF A PIPE SPECIMEN BASED ON CREEP DAMAGE EVALUATION METHOD

Creep Behaviors Calculated by Varying Material Constants Obtained from Different Stress Regions for a Closed-End P91 Pipe

Creep-fatigue interactions in a polycrystalline structural material under typical high-temperature power plant operating conditions

Experimental investigation on creep strengthening phenomenon of a Ni-based single crystal superalloy under cyclic loading and unloading conditions

Creep life prediction for a nickel-based single crystal turbine blade

Creep behavior and in-depth microstructural characterization of dissimilar joints

A Concise Binomial Model for Nonlinear Creep-Fatigue Crack Growth Behavior at Elevated Temperatures

Study on Creep Damage of Ni-Based Superalloy Caused by Variable Load Conditions at Elevated Temperatures

A data-driven roadmap for creep-fatigue reliability assessment and its implementation in low-pressure turbine disk at elevated temperatures

Experimental Method for Creep Crack Growth Testing in Controlled Environments at High Temperatures

Creep Fatigue Analysis of the 316SS Monolith in the MegaPower Heat Pipe Reactor

Study on creep characteristics and the isochronous stress–strain curve of Ni-Cr-Mo superalloy

Correlation Analysis of Established Creep Failure Models through Computational Modelling for SS-304 Material

Analysis of the Creep Mechanism of Low-Alloy Steel in Terms of Plastic Deformation

Creep behavior and life prediction of a reactor pressure vessel steel above phase‐transformation temperature via a deformation mechanism‐based creep model