Abstract:Three-dimensional numerical simulation was conducted to investigate the flow field and heat transfer performance of the Cross-Wavy Primary Surface (CWPS) recuperators; for microturbines. Using high-effective compact recuperators to achieve high thermal efficiency is one of the key techniques in the development of microturbine in recent years. Recuperators need to have minimum volume and weight, high reliability and durability. Most important of all, they need to have high thermal-effectiveness and low pressure-losses so that the gas turbine system can achieve high thermal performances. These requirements have attracted some research efforts in designing and implementing low-cost and compact recuperators for gas turbine engines recently. One of the promising techniques to achieve this goal is the so-called primary surface channels with small hydraulic dimensions. In this paper, we conducted a three-dimensional numerical study of flow and heat transfer for the Cross-Wavy Primary Surface (CATS) channels with two different geometries. In the CWPS configurations the secondary flow is created by means of curved and interrupted surfaces, which may disturb the thermal boundary layers and thus improve the thermal performances of the channels. To facilitate comparison, we chose the identical hydraulic diameters for the above four CWPS channels. Since our experiments on real recuperators showed that the Reynolds number ranges from 150 to 500 under the operating conditions, we implemented all the simulations under laminar flow situations. By analyzing the correlations of Nusselt numbers and friction factors vs. Reynolds numbers of the four CWPS channels, we found that the CWPS channels have superior and comprehensive thermal performance with high compactness, i.e., high heat transfer area to volume ratio, indicating excellent commercialized application in the compact recuperators.

Creep analysis for Cross Wavy primary surface recuperator in 100 kw microturbine system

Creep Analysis Of Cross Wavy Primary Surface Recuperator For Microturbine System

Three-Dimensional Stress Analysis And Configuration Optimization Of Cross Wavy Primary Surface Recuperator For Microturbine System

Finite Element Analysis of Stress on Cross-Wavy Primary Surface Recuperator Based on Thermal-Structural Coupling Model

Stress Analysis of Surface Type Recuperator in a Micro-gas Turbine System

Configuration Optimization of Cross Wave Primary Surface Sheet in the Recuperator Using Particle Swarm Algorithm

Experimental Investigation on Heat Transfer and Pressure Drop in a Microtubine Recuperator with Cross-Wavy Primary Surface Channels

Strength Analysis of High-temperature Creep for a 660MW Ultra-Supercritical Steam Turbine High-pressure Rotor

An Assessment Method of High Temperature Creep Life of Steam Turbine Diaphragm

Analysis Of High Temperature Creep On The Nut Connection Components Of A 600mw Supercritical Steam Turbine

EXPERIMENTAL INVESTIGATION OF FLOW AND HEAT TRANSFER IN A PRIMARY SURFACE RECUPERATOR

Experimental Investigation of Thermal and Hydrodynamic Performances of a Partial Cross-Wavy Recuperator for Microturbine Applications

Creep life assessment of aero-engine recuperator based on continuum damage mechanics approach

Numerical Simulation Of Gas Flow And Heat Transfer In Cross-Wavy Primary Surface Channel For Microtubine Recuperators

Machine Learning-Assisted Probabilistic Creep Life Assessment for High-Temperature Superheater Outlet Header Considering Material Uncertainty

Application of A Creep-Damage Constitutive Model for the Rotor of A 1000mw Ultrasupercritical Steam Turbine

Study on Reliability of High Temperature Heat Exchangers

The Analysis of Plastic Deformation for the Turbine Diaphragm

Influence of High-Temperature Dwell Time on Creep-Fatigue Behavior in A 1000 Mw Steam Turbine Rotor

Creep life prediction for a nickel-based single crystal turbine blade

Influence Of Creep On Low-Cycle Fatigue Life Assessment Of Ultra-Supercritical Steam Turbine Rotor