Abstract:Grafted inorganic nanoparticles can greatly improve the mechanical performance of polymers. To examine the effects of the interfacial characteristics generated by the grafting polymer bonded to nanoparticle surfaces, we chemically grafted nano-silica with different polymers and then melt-mixed it with polypropylene (PP). We extracted the homopolymers produced during the graft polymerization from the grafted products before the composites were manufactured to get rid of the side effects of the nongrafting polymers. We tailored the interfacial interaction between the grafted nano-SiO2 and PP matrix by changing the amount of the grafting polymers on the nanoparticles, that is, the grafting percentage. Mechanical tests indicated that all the composites incorporated with grafted nano-SiO2 particles possessed much higher impact strength than untreated SiO2/PP composites and neat PP. The greatest contribution of the particles was made at a low grafting percentage. Tensile measurements showed that the treated nanoparticles could provide PP with stiffening, strengthening, and toughening effects at a rather low filler content (typically 0.8 vol %) because of the enhanced interfacial adhesion resulting from molecular entanglement and interdiffusion between the grating polymers on the nanoparticles and matrix macromolecules. The presence of grafting polymers on the nanoparticles provided the composites with a tailorable interphase. The tensile performance of the composites was sensitive to the nature of the grafting polymers. Basically, a hard interface was beneficial to stress transfer, whereas a soft one hindered the development of cavities in the matrix. (C) 2004 Wiley Periodicals, Inc.

Preparation and Properties of Nano-Silica Filled Self-Reinforced Polypropylene

Tensile Performance Improvement of Low Nanoparticles Filled-Polypropylene Composites

Performance Improvement of Nano-Silica/polypropylene Composites Through In-Situ Cross-Linking Approach

Silica Nanoparticles Filled Polypropylene: Effects of Particle Surface Treatment, Matrix Ductility and Particle Species on Mechanical Performance of the Composites

Preparation of Nano-Silica/Polypropylene Composites Using Reactive Compatibilization

Effect of Drawing Induced Dispersion of Nano-Silica on Performance Improvement of Poly(Propylene)-Based Nanocomposites

Toughening and strengthening of micro-and nano-SiO2/PP composites

Role of Reactive Compatibilization in Preparation of Nanosilica/polypropylene Composites

GRAFTING POLYMERIZATION ONTO NANOSILICA AND ITS EFFECT ON MECHANICAL PROPERTIES OF PP COMPOSITES

Deformation Characteristics of Nano-Sio2 Filled Polypropylene Composites

Efficient Grafting of Polypropylene Onto Silica Nanoparticles and the Properties of PP/PP-g-SiO2 Nanocomposites

In-Situ Crosslinking Induced Structure Development and Mechanical Properties of Nano-Silica/Polypropylene Composites

Interfacial enhancement of nano-SiO2/polypropylene composites

A Strategy for Significant Improvement of Strength of Semi-Crystalline Polymers with the Aid of Nanoparticles

Interfacial Effects in Polypropylene–silica Nanocomposites

Microstructural Analysis of Nanosilica Reinforced Polypropylene Composite

Nanosilica-Reinforced Polypropylene Composites: Microstructural Analysis and Crystallization Behavior

ENHANCED MECHANICAL PROPERTIES OF POLYPROPYLENE/SILICA NANOCOMPOSITES WITH SURFACE MODIFICATION OF NANO-SILICA VIA IN SITU COPOLYMERIZATION OF METHYL METHACRYLATE AND BUTYL ACRYLATE

Effect of grafted polymeric foaming agent on the structure and properties of nano-silica/polypropylene composites

Silica Hybrid Particles with Nanometre Polymer Shells and Their Influence on the Toughening of Polypropylene.

Improvement of tensile properties of nano-SiO2/PP composites in relation to percolation mechanism