Abstract:With the development of ultra-precision machining technology, parts with microstructures on the surface are playing an increasingly important role in engineering practice. The scanning interference microscope measurement method is widely used in the measurement of microscopic surface topography. This paper proposes a method of interference microscopy combined with subaperture stitching. The first step is to divide and measure the sub-aperture. There is a partial overlap area between the divided adjacent subapertures. The white light interferometer measures each sub-aperture in turn. The second step is edge feature detection. There are highly steep edge features between the bottom of the groove and the surface of the surface microgroove. The stitching algorithm detects edge features by detecting the slope threshold of the sub-aperture. The third step is to correct the abscissa. Project the detected edge feature data onto the OXY plane to generate a 2D data set. The multi-dimensional motion scanning platform inevitably has motion errors in the measurement process, so the edge characteristic curves of adjacent sub-apertures have obvious lateral displacement in the overlapping area. The lateral displacement and angle of the lateral coordinate of each sub-aperture are corrected by the least square method. The fourth step is the height coordinate correction. The stitching algorithm minimizes the height difference between the corresponding points in the overlapping area, and solves it with a linear least squares problem model. We have completed the measurement of the fringe pattern on the computer-generated hologram (CGH) substrate and the complete topography of the long groove on the 10mm hemisphere. After the sub-aperture global iterative stitching algorithm, there is no stitching trace in the simulation result. For the long groove on the hemisphere, we designed a four-dimensional scanning motion platform and a special fixture to ensure that the long groove on the hemisphere rotates around an axis perpendicular to the geodesic line. The center of the white light interference fringe is always at the center of the long slot aperture.

Study on topography measurement of ultra smooth surface

Low Noisy Dual Wavelength Digital Holography and Application in the Ultra-precision Machining Surface Measurement

Research on phase-shifting interferometry contrast three-dimensional topography of ultra precision surface

A Measurement System for the Roughness of Ultra Smooth Surface with Large Aperture

Research on Two Optical Methods for Aspheric Measurement

A Vibration Compensation Method Based on White-light Wavelength Scanning Interferometry

Fast Measurement of Surface Topographies Using a Phase-Measuring Deflectometric Microscopy

Topography measurement and reconstruction of inner surfaces based on white light interference

Development Of User-Friendly Software For The Roughness Measurement Of Ultra Smooth Surface

Modeling and Analysis of Uncertainty in On-Machine Form Characterization of Diamond-Machined Optical Micro-Structured Surfaces

An accurate surface topography restoration algorithm for white light

Micro-Vision Super-Resolution Restoration and Positioning Based on Ultraprecision Machining Topography Guidance

A Micro-Topography Measurement and Compensation Method for the Key Component Surface Based on White-Light Interferometry

Investigation on the Formation Mechanism and Controlling Method of Machined Surface Topography of Ultra-Precision Flycutting Machining

High-resolution white light scanning stitching measurement of full-surface microstructure

A Study of Measurement Technology for Ultra-Precision Freeform Surfaces

Evaluation on Ground Surface Accuracies of Large-Depth and Steeply Micro-Structured SiC Surfaces

A Study on Surface Topography in Cavitation Erosion Tests of AlSi10Mg

Advances in Scanning White Light Interferometry for Surface Topography Measurement

Research on the quality control technology of micro-topography machining based on in situ white light interferometry

Improved phase-shifting diffraction interferometer for microsphere topography measurements