Abstract:Abstract To enable accurate characterization of the mechanical behavior of materials at the micro-scale, e.g., in micro-systems, experiments are required that are representative of the actual (often multi-axial) loading conditions to which these materials are subjected during fabrication and operation. Equally important is the acquisition of mechanical data in the form of multi-axial force measurements, and the measurement of kinematics by in-situ microscopic techniques. To this end, a micro-mechanical testing rig is here realized using commercially available piezoelectric actuators. It is shown that the setup measures forces with a resolution of $\sim 0.3$ ∼ 0.3 [mN] in the x - and y -directions, and $\sim 50$ ∼ 50 [mN] in the z -direction, over a range of 5 [N], yielding a high dynamic (force) range. Furthermore, displacements can be imposed with a resolution of $\sim 1$ ∼ 1 [nm] over a range of 200 [ μ m], in all three directions ( x , y , z ). The setup is compact, vacuum compatible, and specimens are loaded on top of the setup so that the field of view is unobstructed, allowing for in-situ testing with optical and scanning electron microscopy, and optical profilometry. A generic method is developed for extracting quasi-static forces from the piezoelectric actuators. Furthermore, challenges raised from the use of commercial actuators, for which the public technical specifications are generally incomplete, are overcome and the solution strategy is described. Proof-of-concept experiments on flexible, organic, light-emitting diodes demonstrate the potential of the setup to provide rich micro-mechanical data in the form of tri-axial force and displacement measurements. The commercial availability of the piezoelectric actuators, combined with the proposed engineering solutions lead to a generally accessible micro-mechanical test setup to investigate small-scale specimens under realistic, multi-axial loading conditions.

Rapid prototyping of a piezoelectric six-axis accelerometer

A Gravity-Assisted Piezoelectric Inertial Actuator for Bidirectional Smooth Drives by Single Excitation Source

Integrated piezoelectric micromechanical vibration platform for six degree of freedom motion

Design and simulation of a novel MEMS-based single proof mass three-axis piezo-capacitive accelerometer

Design and Analysis of a Precision Multi-DOF Placement Device

The Device for Calibration Based on the Six-freedom of Generalized Force

Design and Simulation of A Novel Highly Symmetrical Piezoelectric Triaxial Accelerometer

A Novel Tri-Axial Piezoelectric MEMS Accelerometer with Folded Beams

Design and Simulation of Capacitive, Piezoresistive and Piezoelectric Triaxial Accelerometers Using a Highly Symmetrical Quad-Beam Structure

A Novel Piezoelectrically Actuated 2-Dof Compliant Micro/Nano-Positioning Stage with Multi-Level Amplification

A comprehensive modeling of a 6-axis single proof mass MEMS-based piezoelectric IMU

Modeling of a hexapod piezo-actuated positioning platform

Design of a Triaxial Piezoelectric Accelerometer

Development of a three-degree-of-freedom piezoelectric actuator

Theoretical and numerical investigation of a new 3-axis SU-8 MEMS piezoresistive accelerometer

Design and Simulation for Tri-Axial Piezoresistive Mems Accelerometer

A piezoresistive micro-accelerometer with high frequency response and low transverse effect

Design and Experimental Study of a Stepping Piezoelectric Actuator with Large Stroke and High Speed

An In-Situ, Micro-Mechanical Setup with Accurate, Tri-Axial, Piezoelectric Force Sensing and Positioning

Development of a MEMS Piezoresistive High-g Accelerometer with a Cross-Center Block Structure and Reliable Electrode

Design of Electrostatic Levitation Loop for Six-Axis Micromachined Accelerometer