Abstract:An incremental analog-to-digital converter (I-ADC) with chopper stabilization (CHS) and self-calibration techniques is presented to meet the requirements of high resolution,low power consumption and small area for measuring devices of ultra-low-frequency signals.The I-ADC has the function of reset operation to avoid pattern noise caused by ultra-low-frequency signals.A first-order architecture is adopted for the I-ADC to reduce power consumption and chip area,and to achieve 14-bit resolution by increasing certain conversion time.The chopper stabilization technique is employed to eliminate the influence of amplifier's low-frequency noise and offset on the I-ADC's precision,and power-on self-calibration is employed to eliminate the systematic offset of the I-ADC.The circuit of the I-ADC and the layout of the modulator are designed with the DongBu 0.5 μm BCD technology.Simulation results in an input range of -156.25～156.25 mV show that the maximum absolute conversion error of the I-ADC is 21 μV,the maximum errors of differential nonlinearity and integral nonlinearity are 0.12 and 0.21 bit,respectively,and the average current consumption of the modulator is only 20 μA.The modulator occupies a chip area of only 150 μm × 310 μm.The proposed I-ADC achieves 14 bit resolution,which is required by ultra-low-frequency signal measuring systems,such as lithiumion battery coulometer,and has significant advantages of low power consumption and small area.

Improving ADC Resolution Through the Least Square Estimation

An 18-Bit 2MSPS SAR ADC with Double Passive Noise-Shaping Calibration

A 14-Bit Column-Parallel Two-Step SA ADC with On-Chip Scaled Reference Voltages Self-Calibration for CMOS Image Sensor

A Calibration Scheme for a 800-Ms/s 14 Bit Pipelined ADC in 28-Nm CMOS

Method of Improving the ADC Precision of DSP

A Short Review of Some Analog-to-digital Converters Resolution Enhancement Methods

Optimizing for High Resolution ADC Model With Combined Architecture

Maximizing the Resolution of SAR ADC with Multisegmented DAC Using Improved MLE Calibration

Improve the Resolution of Single-pole Magnetic Encoder Using over Sampling

Self-Dithering Technique for High-Resolution SAR ADC Design

Method of Improving Resolution of A/D Conversion in Intermediate-Frequency Signals Based on Post Bandpass Filtering

Experimental Evaluation of Resolution Enhancement of a Phase-Shifted All Optical Analog-to-digital Converter Using an Electrical Analog-to-digital Converter Array

Exploiting Smallest Error to Calibrate Non-Linearity in SAR Adcs.

A 10.5-B ENOB 645 Nw 100ks/s SAR ADC with Statistical Estimation Based Noise Reduction

A 0.7-V 0.6- $\mu \text{w}$ 100-Ks/s Low-Power SAR ADC with Statistical Estimation-Based Noise Reduction

A High-Resolution Discrete-Time Second-Order ΣΔ ADC with Improved Tolerance to KT/C Noise Using Low Oversampling Ratio

A 12-Bit 100ms/s SAR ADC with Digital Error Correction and High-Speed LMS-Based Background Calibration

A High-Quality Ratio-Metric Measurement Method Based on Analog-to-Digital Converter for Precision Sensors

Sinewave Fit Algorithm Based on Total Least-Squares Method with Application to ADC Effective Bits Measurement

Incremental Analog-to-Digital Converter with High Resolution and Low Power for Measurement of Ultra-Low-Frequency Signals

Recent Advances in High-Resolution Hybrid Discrete-Time Noise-Shaping ADCs