Abstract:The noise-shaping (NS) SAR ADC is an emerging hybrid architecture that achieves high resolution and power-efficiency simultaneously by combining the merits of the SAR ADC and the AIADC, making it attractive to sensor readout and healthcare applications. To implement NS, most prior works adopted the classic cascaded integrator feed-forward (CIFF) structure for noise filtering [1-5]. Opamp-based integrators were used in [1-3] to achieve a relatively sharp noise transfer function (NTF), but at the cost of power and scaling friendliness. Reference [4] demonstrated 2 <sup>nd</sup> -order NS using fully passive switched-capacitor (SC) integrators, but has limited NS and thermal noise performance. Reference [5] combines passive SC filters with a dynamic amplifier (D-amp) to achieve good noise and power, but is vulnerable to process-voltage-temperature (PVT) variations. In addition, no prior NS SAR has realized complex NTF zeros for optimum NS. This presents a need for an NS SAR ADC that can combine optimized NTF, power efficiency and PVT robustness. To overcome the limitations of existing work, instead of adopting the CIFF structure, this paper presents a 2 <sup>nd</sup> -order NS SAR ADC using an error-feedback (EF) structure. It highlights the capability of realizing optimized complex NTF zeros by simply using charge sharing summation, a passive SC FIR and a comparator-reused dynamic amplifier with PVT tracking. This work achieves sharp NS performance while maintaining both hardware and power efficiency merits of the NS SAR with improved robustness. The prototype chip, fabricated in 40nm CMOS, achieves a 79dB SNDR at an OSR of 8 using a 9b SAR, resulting in a peak Schreier FoM of 178dB.

Noise Shaping Implementation Intwo-Step/Sar Adc Architectures Based On Delayed Quantization Error

An 18-Bit 2MSPS SAR ADC with Double Passive Noise-Shaping Calibration

A Low Power Noise-Shaping SAR ADC with Improved Integrator and Hybrid DAC Mismatch Mitigation Technique

A 13-ENOB Second-Order Noise-Shaping SAR ADC Realizing Optimized NTF Zeros Using the Error-Feedback Structure

A Second-Order Noise-Shaping SAR ADC with Passive Integrator and Tri-Level Voting

9.3 A 40Khz-Bw 90Db-Sndr Noise-Shaping SAR with 4× Passive Gain and 2Nd-Order Mismatch Error Shaping

A 2Nd-Order Noise-Shaping SAR-Assisted Pipeline ADC with Order-Boosted Gain-Error-Shaping

A 13-Bit ENOB Third-Order Noise-Shaping SAR ADC Employing Hybrid Error Control Structure and LMS-Based Foreground Digital Calibration

A 13-Enob 2nd-Order Noise-Shaping Sar Adc Realizing Optimized Ntf Zeros Using An Error-Feedback Structure

A 12-Bit ENOB 8mhz BW Noise-Shaping SAR ADC Using High-Speed Switches.

A 11-Bit ENOB Noise-shaping SAR ADC with Non-binary DAC Array

An Overview of Noise-Shaping SAR ADC: from Fundamentals to the Frontier

A 20khz 87.2db SNDR 12.1µw NS SAR ADC Based on Quantization-Error-Matched RLSB-First Algorithm

An 871 Nw 96.2 Db SNDR Pipelined Second-Order Noise-Shaping SAR ADC Employing Charge-Efficient CLS-Assisted Residue Amplifier

A 77.1-dB-SNDR 6.25-MHz-BW Pipeline SAR ADC With Enhanced Interstage Gain Error Shaping and Quantization Noise Shaping

A Band-Pass Noise-Shaping Modulator Using the Error-Feedback Structure on a 10-bit SAR ADC

On the System-Level Design of Noise-Shaping SAR Analog-to-Digital Converters

A 12B-Enob 61µw Noise-Shaping SAR ADC with a Passive Integrator

A 73-dB-SNDR 2nd-Order Noise-Shaping SAR With a Low-Noise Time-Domain Comparator

A 68 uW 31 kS/s Fully-Capacitive Noise-Shaping SAR ADC with 102 dB SNDR

A 91 Db SNDR Calibration-Free Fully-Passive Noise-Shaping SAR ADC with Mismatch Error Shaping