Abstract:Solder joint integrity has long been recognized as a key issue affecting the reliability of integrated circuit packages. In this study, both experimental and finite element simulation methods were used to characterize the mechanical performance and fracture behavior of micro-scale ball grid array (BGA) structure Cu/Sn-3.0Ag-0.5Cu/Cu solder joints with different standoff heights (h, varying from 500 to 100 mu m) and constant pad diameter (d, d= 480 mu m) and contact angle under shear loading. With decreasing h (or the ratio of hid), results show that the stiffness of BGA solder joints clearly increases with decreasing coefficient of stress state and torque. The stress triaxiality reflects the mechanical constraint effect on the mechanical strength of the solder joints and it is dependent on the loading mode and increases dramatically with decreasing h under tensile loading, while the change of h has very limited influence on the stress triaxiality under shear loading. Moreover, when h is decreased, the concentration of stress and plastic strain energy along the interface of solder and pad decreases, and the fracture location of BGA solder joints changes from near the interface to the middle of the solder. Both geometry and microstructure greatly affect the shear behavior of joints, the average shear strength shows a parabolic trend with decreasing standoff height. Furthermore, the brittle fracture of BGA solder joints after long-time isothermal aging was investigated. Results obtained show that, under the same shear force, the stress intensity factors, K-I and K-II, and the strain energy release rate, G(I), at the Sn-3.0Ag-0.5Cu/Cu6Sn5 interface and in the Cu6Sn5 layer obviously decrease with decreasing h, hence brittle fracture is more prone to occur in the joint with a large standoff height. (C) 2015 Elsevier Ltd. All rights reserved.

Study of thermo-mechanical stress distribution for CBGA package

Thermal Stress Measurement of Solder Joints in Bga Packages: Theoretical and Experimental

Predicting fatigue life of Solder joint with submodel method for a BGA package

Simulation and Experimental Analysis of Thermomechanical Stress Around Interconnects for W2W Hybrid Bonding

Structural optimization of thermal stresses in BGA solder joints based on improved BP neural network-genetic algorithm

The Effect of Pressure and Orientation on Cu-Cu3Sn Interface Reliability under Isothermal Ageing and Monotonic Traction Via Molecular Dynamics Investigation

Finite Element Analysis of Underfill Effect on the CBGA Package Reliability under Thermal Cycling

Geometry Effect on Mechanical Performance and Fracture Behavior of Micro-Scale Ball Grid Array Structure Cu/Sn-3.0ag-0.5cu/Cu Solder Joints

Effect of Thermal Cycling on the Strain and Stress Distribution of TSVs and Solder Bumps in Stacked Package Structure

Degradation Behaviors of Micro Ball Grid Array (μbga) Solder Joints under the Coupled Effects of Electromigration and Thermal Stress

Analysis of the BGA Solder Sn–3.0Ag–0.5Cu Crack Interface and a Prediction of the Fatigue Life under Tensile Stress

Simulation analysis of residual stress of BGA solder joints after reflow soldering based on element birth and death technology

Coupling effects of mechanical vibrations and thermal cycling on reliability of CCGA solder joints

A Molecular Dynamics Investigation of the Effect of Pressure and Orientation on the Cu Consumption in Cu-Cu3Sn Interface under Isothermal Ageing and Its Dissipative Mechanisms during Traction

Simulation Study on Thermo-Fatigue Failure Behavior of Solder Joints in Package-On-Package Structure

A multi-scale approach to microstructure-sensitive thermal fatigue in solder joints

Thermal stress analysis of PBGA under natural convection using a fluid-solid coupling method

Reliability Evaluation of Board-Level Flip-Chip Package under Coupled Mechanical Compression and Thermal Cycling Test Conditions

Study of Accelerated Shear Creep Behavior and Fracture Process of Micro-Scale Ball Grid Array (BGA) Structure Cu/Sn–3.0Ag–0.5Cu/Cu Joints under Coupled Electro-Thermo-mechanical Loads

Study of the effect of crystal orientation on the mechanical response and fatigue life of solder joints under thermal cycling by crystal plasticity

Survey on Fatigue Life Prediction of BGA Solder Joints