Abstract:Since vacuum circuit breakers gradually advanced to higher voltage levels, axial magnetic field (AMF) contacts have drawn a great deal of attention due to their excellent breaking ability. The cup-type AMF contact is a common kind of AMF contact, which has much potential in contact design and application of high voltage grade systems due to the advantages of strong structural strength, uniform magnetic field distribution, lower resistance, etc. This study analyzes the arcing characteristics of a cup-type AMF contact with a large slotted rotation angle at various diameter-to-gap ratios (DGRs). The arcing process is divided into five stages as follows: initial diffusion, contracting, fully constricted, re-diffusion, and extinguished. Arc self-rotation and anode separation phenomena in the re-diffusion stage appear when the DGR is 58/24. The reasons for these occurrences were discussed and explained with regard to the magnetic field vector's spatial distribution. The duration of each stage and the current threshold of a fully constricted arc will both differ with the change of the DGR. The structural parameters of the fully constricted arc were computed through the method of imaging the luminous intensity distribution after the arc was fully constricted. The source of the change in the arc voltage can be seen in the variation of arc structural parameters, which also reflect anode activity intensity to a certain extent. The transient magnetic field simulation method was used to explain why the arc under the same instantaneous current shows variable morphology at the extinguished stage and contracting stage in one arcing process. The research results presented in the article can be used as a reference for developing high-voltage cup-type AMF contacts.

Simulation And Analysis Of Cup-Type Axial Magnetic Field Contacts In Vacuum Interrupter

Numerical Analysis on Magnetic Field Characteristic of Axial Magnetic Field Contacts under Long Break Distance

Axial Magnetic Field of a New Cup Type Axial Magnetic Field Vacuum Interrupter Contact With Iron Plates

Analysis of Magnetic Field Characteristics of Vacuum Interrupters with Cup Type Axial Magnetic Field Contacts Based on Orthogonal Design

Analysis and Optimization of Axial Magnetic Field Characteristics of 252 Kv Vacuum Interrupter Contacts

Comparison of Axial Magnetic Field Characteristics of Four Axial Magnetic Field Vacuum Interrupter Contacts

Investigation of vacuum arc characteristics in cup-type axial magnetic field contacts with irons and without irons

Study on a New Single Coil-Type Axial Magnetic Field Contact for High-Voltage Vacuum Interrupters

Comparison of Axial Magnetic Field Characteristics of 5 Axial Magnetic Field Vacuum Interrupter Contacts

Study on Phase Shift Time of Cup-type Axial Magnetic Field Contact

Experimental Validation of Relationship Between Interrupting Capacity of Axial Magnetic Field Vacuum Interrupters with Cup Type Contacts and their Contact Diameters and Contact Gaps

Study on Structural Parameters of Cup-Type Axial Magnetic Contacts on Gap Magnetic Field and Arc Characteristics

Simulation and Experimental Investigation on a New Type of Cup-Shaped Contacts With Iron Cores

Study on Arc Characteristics and Influencing Factors of Cup-Shaped Axial Magnetic Field Contact at Different Gap Distances

Computation and Analysis of Magnetic Blowout Forces in Transverse Magnetic Field Contacts of Vacuum Interrupter

3D SIMULATION ON VACUUM ARC CONTROLLED BY THREE KINDS OF AMF CONTACTS

Experimental Investigation of Vacuum Arc Characteristics of Four Kinds of AMF Contacts

Analysis and Optimization of Magnetic Field Characteristics for Vacuum Interrupter with Horseshoe-shaped Axial Magnetic Field Contacts Based on Response Surface Method

Modeling and Simulation of the Influence of Contact Structure on the Characteristics of High Current Vacuum Arc Plasma

Experimental Study and Characteristic Analysis of Vacuum Arc Between Cup-Type Axial Magnetic Contacts under Different Diameter-to-gap Ratios

Study on Excitation Characteristics of 2/3 Coil-type AMF Contacts under Equal Proportion Structure in Vacuum Interrupters