Abstract:Vacuum circuit breakers (VCBs) are widely used to protect medium-voltage (MV) power distribution circuits. Since SF6 gas is specified as a global warming gas, VCBs are stepping into a higher voltage sector to protect power transmission circuits. Axial magnetic field (AMF) contacts are widely used in vacuum interrupters. In this paper, we propose a concept of critical radius of AMF contacts. When coil width and coil height are fixed, the axial magnetic flux density increases first with increasing contact diameter. Then, it reaches a maximum value. Thereafter, the axial magnetic flux density decreases. The contact radius corresponding to the maximum axial magnetic flux density is critical radius. The concept of critical radius is validated by coil-type AMF contacts and slot-type AMF contacts in MV vacuum interrupters with finite-element analysis. Critical radius is only related to contact geometry parameters and the current has no influence on critical radius. Critical radius increases with increasing contact gap, coil width, coil height, and thickness of the contact plate. In high-voltage AMF vacuum interrupters, axial magnetic flux density per kiloampere increases with increasing contact diameter since the critical radius is typically high with a high contact gap and it is in the rising branch. In an MV AMF vacuum interrupter, inter-rupting capacity could increase with an increase of the contact diameter with a different rising rate before and after the critical radius. This is expected to be experimentally validated.

Study on a New Single Coil-Type Axial Magnetic Field Contact for High-Voltage Vacuum Interrupters

Experimental Investigation of Vacuum Arc under Different Axial Magnetic Field Contacts for 40.5 Kv Vacuum Interrupters

Vacuum-Arc Behaviors of a Coil-Type Axial-Magnetic-Field Contact at Contact Gap of 60 Mm

Experimental Investigation of Vacuum Arc Characteristics of Four Kinds of AMF Contacts

Numerical Analysis on Magnetic Field Characteristic of Axial Magnetic Field Contacts under Long Break Distance

A New Electrode Applied to High Voltage Vacuum Interrupter and Its Performance

Axial magnetic field strength needed for a 126kV single break vacuum interrupter

Arc Behaviours in Vacuum Interrupters with Axial Magnetic Field Electrodes

Study on Arc Characteristics and Influencing Factors of Cup-Shaped Axial Magnetic Field Contact at Different Gap Distances

Comparison of Axial Magnetic Field Characteristics of Four Axial Magnetic Field Vacuum Interrupter Contacts

The Discharge Development and Arc Modes in Vacuum at A Long Gap Distance in Vacuum Interrupters

Analysis of Axial Magnetic Field electrode applied to high voltage Vacuum Interrupters

Experimental Investigation on the Characteristics of Vacuum Arc in Coupled AMF Contacts

Research on Vacuum Arc Characteristics of a New Electrode Structure Applied in High Voltage Vacuum Interrupter

Comparison of Axial Magnetic Field Characteristics of 5 Axial Magnetic Field Vacuum Interrupter Contacts

Critical Radius of Axial Magnetic-Field Contacts in Vacuum Interrupters

A new slot type axial magnetic field contact with low resistance

Numerical Study of Large Contact Diameter and Gap High Current Vacuum Arc

High-interrupting-capability vacuum interrupter with two-pole axial magnetic field electrode

Simulation And Analysis Of Cup-Type Axial Magnetic Field Contacts In Vacuum Interrupter

Analysis of AMF vacuum contacts with ferromagnetic material