Abstract:Since vacuum circuit breakers gradually advanced to higher voltage levels, axial magnetic field (AMF) contacts have drawn a great deal of attention due to their excellent breaking ability. The cup-type AMF contact is a common kind of AMF contact, which has much potential in contact design and application of high voltage grade systems due to the advantages of strong structural strength, uniform magnetic field distribution, lower resistance, etc. This study analyzes the arcing characteristics of a cup-type AMF contact with a large slotted rotation angle at various diameter-to-gap ratios (DGRs). The arcing process is divided into five stages as follows: initial diffusion, contracting, fully constricted, re-diffusion, and extinguished. Arc self-rotation and anode separation phenomena in the re-diffusion stage appear when the DGR is 58/24. The reasons for these occurrences were discussed and explained with regard to the magnetic field vector's spatial distribution. The duration of each stage and the current threshold of a fully constricted arc will both differ with the change of the DGR. The structural parameters of the fully constricted arc were computed through the method of imaging the luminous intensity distribution after the arc was fully constricted. The source of the change in the arc voltage can be seen in the variation of arc structural parameters, which also reflect anode activity intensity to a certain extent. The transient magnetic field simulation method was used to explain why the arc under the same instantaneous current shows variable morphology at the extinguished stage and contracting stage in one arcing process. The research results presented in the article can be used as a reference for developing high-voltage cup-type AMF contacts.

Investigation of vacuum arc characteristics in cup-type axial magnetic field contacts with irons and without irons

Comparison of Vacuum Arc Behaviors for Slot-Type Axial Magnetic Field Contacts with and Without Iron Plates

Experimental Investigation of Vacuum Arc Characteristics of Four Kinds of AMF Contacts

Experimental Investigation on the Characteristics of Vacuum Arc in Coupled AMF Contacts

Study on Arc Characteristics and Influencing Factors of Cup-Shaped Axial Magnetic Field Contact at Different Gap Distances

Study on Structural Parameters of Cup-Type Axial Magnetic Contacts on Gap Magnetic Field and Arc Characteristics

Experimental and Simulation Research on Influence of Axial Magnetic Field Components on Vacuum Arc Between Transverse Magnetic Field Contacts

Simulation And Analysis Of Cup-Type Axial Magnetic Field Contacts In Vacuum Interrupter

Effect of Iron Core Structure on the Characteristics of Axial Magnetic Field for Large-diameter Cup-shaped Contact

Experimental Investigation of Vacuum Arc Characteristic under Axial Magnetic Field

Experimental Study and Characteristic Analysis of Vacuum Arc Between Cup-Type Axial Magnetic Contacts under Different Diameter-to-gap Ratios

3D SIMULATION ON VACUUM ARC CONTROLLED BY THREE KINDS OF AMF CONTACTS

Axial Magnetic Field of a New Cup Type Axial Magnetic Field Vacuum Interrupter Contact With Iron Plates

Analysis and Comparison of Magnetic Characteristics in Cup-type Axial Magnetic Field Contacts with Irons and Without Irons

Study on a New Single Coil-Type Axial Magnetic Field Contact for High-Voltage Vacuum Interrupters

Numerical Simulation of Vacuum Arc Movement Between Transverse Magnetic Field Contacts

Experimental Investigation of Vacuum Arc under Different Axial Magnetic Field Contacts for 40.5 Kv Vacuum Interrupters

Simulation Analysis and Experimental Investigation of the Iron-Core Cup-Shaped Transverse Magnetic Field Contact

Arc Behaviours in Vacuum Interrupters with Axial Magnetic Field Electrodes

Observation and Investigation of Vacuum Arc under Various Distributed Axial Magnetic Fields

Experimental Investigation on the Vacuum Arc Behaviors of the Axial Magnetic Field (AMF) Electrode with Single Coil Structure