Abstract:Binary TiO2-Al2O3 serial composites(TA-x) and the NiMo supported catalysts(NiMo/TA-x) were successfully synthesized at different solvent evaporation temperatures,. The materials were characterized by several advanced characterization techniques, and the catalytic hydrodesulfurization (HDS) performances were evaluated. The results revealed that the synthesized TA-x serial composites are amorphous mixtures of TiO2 and Al2O3 with highly ordered two-dimensional hexagonal mesopores. Both the mesostructures and the acidities of the synthesized TA-x composites changed at different evaporation temperature of the solvent. The metal-support interaction(MSI), the existence states and the coordination states of the Mo precursors can be modulated by the changes in the physicochemical property of the TA-x composites caused by the solvent evaporating temperature. A moderate solvent evaporation temperature is favorable for the doping of Ni species into the MoS2 slab and Mo sulfidation degree, thus enhancing the proportion of the NiMoS active phases. Catalyst NiMo/TA-60 exhibits superior activity and the highest direct desulfurization(DDS) pathway selectivity due to the excellent acidity and pore structure property, the highest dispersion and the highest Mo sulfidation degree, a moderate MSI, the highest efficiency in the formation of NiMoS phase and the highest proportion of corner Mo atoms. Moreover, the rate constants of the specific HDS pathways can be correlated with the specific types of active sites: the DDS pathway (kDDS) is closely related to the proportion of corner active sites and the hydrogenation desulfurization pathway (kHYDS) is closely related to the proportion of brim sites. The activity of a single corner active site is found to be approximately 100 times that of a single edge active site. These findings are promising in the design of HDS catalysts for inferior distillates.

Effect of internal diffusion on thiophene hydrodesulfurization in pyrolysis gasoline

Global Kinetics of Thiophene Hydrodesulfurization in Pyrolysis Gasoline

The Effect of Hydrophobically Modified Iron Catalysts with Hexadecyltrimethoxysilane on Fischer‐Tropsch Synthesis

Role of the Solvent Evaporating Temperature on the NiMo/TiO2-Al2O3 Catalyst and the Hydrodesulfurization Performance for 4,6-Dimenthyldibenzothiophehe

Restrictive diffusion and hydrodesulfurization reaction of dibenzothiophenes over NiMo / SBA ‐15 catalysts

Effect of Methanol on Catalytic Performance of Hy Zeolite for Desulfurization of Fcc Gasoline by Alkylation

Molecular Dynamics Study on the Diffusion of Organosulfur Compounds in Porous Solids

A STUDY ON THE EFFECT OF PREPARATION PARAMETERS ON THE CATALYTIC PERFORMANCE AND ACTIVE COMPONENTS OF A NEW TYPE HYDRODESULFURIZATION CATALYST

Insight into the intraparticle diffusion of residue oil components in catalysts during hydrodesulfurization reaction

Kinetic Study of Hydrodesulfurization of Coker Gas Oil in a Slurry Reactor

Mechanistic studies and kinetics of the desulfurization of 2-phenylcyclohexanethiol over sulfided Mo, Ni-Mo, and Co-Mo on γ-Al2O3

Preparation of Co-Mo/γ-Al2O3 catalyst and the catalytic hydrogenation effects on coal-related model compounds

Desulphurisation of dibenzothiophene and 4,6–dimethyl dibenzothiophene via enhanced hydrogenation reaction route using RePd–TiO2/SiO2 aerogel catalysts: kinetic parameters estimation and modelling

Pyrolysis Gasoline Hydrogenation in the Second-Stage Reactor: Reaction Kinetics and Reactor Simulation

Stimulation Calculation of Desulfurization Mechanisms Dominated by Free Radicals Reactions During Pyrolysis of Thiophenes Under Water Vapor Atmosphere

Effects of Fe species on promoting the dibenzothiophene hydrodesulfurization over the Pt/γ-Al2O3 catalysts

Comparison of the intraparticle diffusion of DBT and 4,6-DMDBT in HDS over different mesostructured silica-based catalysts

Kinetics of Selective Hydrogenation of Olefins in Pyrolysis Gasoline

Enhanced hydrodesulfurization activity of thiophene over hollow tubular CoMo unsupported catalysts

Effect of molecular structure on pyrolysis coking performances of hydrocarbons at different temperatures

Coking Process of Catalyst Based on In-Situ Diffuse FT-IR Spectroscopy in Reaction of Methanol to Propene