Abstract:This study details the promoting effects that SO(4)(2-)has on a NiMo/gamma-Al(2)O(3)catalyst prepared using NiSO4(CAT-Sulf) as a nickel precursor, compared with the Ni(NO3)(2)(CAT-Nit) and the industrial NiMoP-complex (CAT-NiP) after 600 degrees C calcination. The three catalysts were characterized by virtue of X-ray diffraction (XRD), thermogravimetry mass spectrometry (TG-MS), N(2)adsorption-desorption, hydrogen temperature programmed reduction (H-2-TPR), X-ray photoelectron spectroscopy (XPS) and high-resolution transmission electron microscopy (HRTEM). Hydrodesulfurization (HDS) activity was assessed using dibenzothiophene (DBT) as the feedstock. On the one hand, compared with CAT-Nit, the SO(4)(2-)anions could be anchored on the catalyst surface due to their thermal stability and strong interaction with Al2O3, while few NO(3)(-)anions could be found. These anchored SO(4)(2-)anions weaken the metal-support interaction and hinder the formation of NiAl2O4, thereby facilitating both the sulfidation of Mo species and the decoration of Ni atoms and generating more Ni-Mo-S active sites. On the other hand, compared with CAT-NiP, the residual SO(4)(2-)anions do not impair the support properties and CAT-Sulf maintains excellent textural structure,i.e.high specific surface area and a proper pore structure. Therefore, CAT-Sulf exhibits the highest dibenzothiophene hydrodesulfurization (DBT-HDS) activity out of the three catalysts. Moreover, these anchored SO(4)(2-)anions effectively hinder the aggregation and growth of the active phases, thus guaranteeing a catalyst with high metal dispersion and good stability. Finally, using the inferior residual oil as a feedstock, the stability of CAT-Sulf was also assessed compared with an industrial catalyst (CAT-Ref), and the results show that during 1500 h on stream, its HDS ratio is maintained at around 78%, while that of the industrial catalyst (CAT-Ref) declined fromca.82% toca.71% after 1200 h, indicating that CAT-Sulf exhibits much better stability and shows excellent industrial potential. The anchored SO(4)(2-)anions simultaneously endow the NiSO4-derived catalyst with excellent physical structure, high intrinsic activity and good stability, indicating that it might be a simple and effective method to balance the activity and stability of the HDS catalyst using thermostable nickel precursor salts.

Mechanistic studies and kinetics of the desulfurization of 2-phenylcyclohexanethiol over sulfided Mo, Ni-Mo, and Co-Mo on γ-Al2O3

Catalytic Characteristics of Active Corner Sites in CoMoS Nanostructure Hydrodesulfurization – A Mechanism Study Based on DFT Calculations

Role of the Solvent Evaporating Temperature on the NiMo/TiO2-Al2O3 Catalyst and the Hydrodesulfurization Performance for 4,6-Dimenthyldibenzothiophehe

Influence of Active Phase Structure of CoMo/Al2O3 Catalyst on the Selectivity of Hydrodesulfurization and Hydrodearomatization

Effect of sulfiding conditions on the hydrodesulfurization performance of the ex-situ presulfided CoMoS/γ-Al2O3 catalysts

Catalytic Performance in Hydrodesulfurization of Thiophene and Ir Investigation of Co and No Adsorption over Co−Mo/Al2O3 and Ru−Co−Mo/Al2O3 Catalysts

Support Effects on Thiophene Hydrodesulfurization over Co-Mo-Ni/Al2O3 and Co-Mo-Ni/TiO2-Al2O3 Catalysts

Promoting effects of SO(4)(2-)on a NiMo/gamma-Al(2)O(3)hydrodesulfurization catalyst

On the Surface Sites of MoP/SiO2 Catalyst under Sulfiding Conditions: IR Spectroscopy and Catalytic Reactivity Studies

Precise Tuning the CoMoOx/Al2O3 and CoMoSx/Al2O3 Interfacial Structures for Efficient Hydrodesulfurization of Dibenzothiophene

Essential Role of Promoter Co on the MoS 2 Catalyst in Selective Hydrodesulfurization of FCC Gasoline

A Comprehensive Theoretical Investigation on the Thiophene Hydrodesulphurisation Mechanism over Sulphided Co–Mo Catalysts Supported by ZSM-5, FAU, Beta and MCM-22 Zeolites

Electronic structure regulation of CoMoS catalysts by N, P co-doped carbon modification for effective hydrodesulfurization

Effects of MgO on Co-Mo/Al 2O 3-MgO catalyst performances in hydrodesulfurization

Adsorption and Reaction of Thiophene and H2S on Mo2C/Al2O3 Catalyst Studied by in Situ FT-IR Spectroscopy

Promoting effects of SO42− on a NiMo/γ-Al2O3 hydrodesulfurization catalyst

Hydroisomerization of Model Naphtha over Sulfided Co-Mo/SBA-15 Catalyst

Tailoring the Structure of Co-Mo/mesoporous Γ-Al2o3 Catalysts by Adding Multi-Hydroxyl Compound: A 3000 Kt/a Industrial-Scale Diesel Ultra-Deep Hydrodesulfurization Study

Mesoporous Carbon Supported Co-Mo and Ni-Mo Catalysts for Hydrodesulfurization

Selective Hydrodesulfurization of Gasoline on Co/MoS 2±x Catalyst: Effect of Sulfur Defects in MoS 2±X

Dibenzothiophene hydrodesulfurization activity and surface sites of silica-supported MoP, Ni2P, and Ni-Mo-P catalysts