Abstract:X-ray diffraction/scattering computed tomography (XRS-CT) was used to create two-dimensional images, with 20 μm resolution, of passivated Co/TiO2/Mn Fischer-Tropsch catalyst extrudates postreaction after 300 h on stream under industrially relevant conditions. This combination of scattering techniques provided insights into both the spatial variation of the different cobalt phases and the influence that increasing Mn loading has on this. It also demonstrated the presence of a wax coating throughout the extrudate and its capacity to preserve the Co/Mn species in their state in the reactor. Correlating these findings with catalytic performance highlights the crucial phases and active sites within Fischer-Tropsch catalysts required for understanding the tunability of the product distribution between saturated hydrocarbons or oxygenate and olefin products. In particular, a Mn loading of 3 wt % led to an optimum equilibrium between the amount of hexagonal close-packed Co and Co2C phases resulting in maximum oxygenate selectivity. XRS-CT revealed Co2C to be located on the extrudates' periphery, while metallic Co phases were more prevalent toward the center, possibly due to a lower [CO] ratio there. Reduction at 450 °C of a 10 wt % Mn sample resulted in MnTiO3 formation, which inhibited carbide formation and alcohol selectivity. It is suggested that small MnO particles promote Co carburization by decreasing the CO dissociation barrier, and the Co2C phase promotes CO nondissociative adsorption leading to increased oxygenate selectivity. This study highlights the influence of Mn on the catalyst structure and function and the importance of studying catalysts under industrially relevant reaction times.

Coking Process of Catalyst Based on In-Situ Diffuse FT-IR Spectroscopy in Reaction of Methanol to Propene

Catalytic Properties and Reaction Behaviors of ZSM-5 Catalysts in Different MTP Reaction-Regeneration Cycles

Effect of Hydrothermal Treatment on Suppressing Coking of Zsm-5 Zeolite During Methanol-To-Propylene Reaction

Pore Plugging Effects on the Performance of ZSM-5 Catalyst in MTP Reaction Using a Discrete Model

Influence of steam treatment on ZSM-5 catalyst and MTP reaction

Solvents Molecular Mobility in Coked Catalyst ZSM-5 Studied by NMR Relaxation and Pulsed Field Gradient Techniques

Methanol to Propylene over Foam SiC-Supported ZSM-5 Catalyst: Performance of Multiple Reaction–Regeneration Cycles

Kinetic Perspective on Methanol to Propylene Process Via HZSM-5 Catalyst: Balancing Between Reaction and Diffusion

Phosphorous Modified High Silica ZSM-5 Spherical Catalyst and Its Reaction on Methanol to Propylene

Effect of support texture properties on Ni-Fe/γ-Al_2O_3 catalyst structure and catalytic performance for CO methanation

Catalytic and deactivated behavior of SAPO-34/ZSM-5 composite molecular sieve synthesized by in-situ two-step method

Boosting Toluene Combustion in Pt-Co3O4 Catalysts by Directional Tuning Strong Metal-Support Interactions Through Metal-Organic Template Pyrolysis

A study on acceleration and inhibition of coking on metal surfaces by micropyrolysis of ethylene feedstocks

TGA-MS study oncracking of the coke deposited on catalyst for MTO Reaction

Effect of Co Additive on Formation of Coke Deposits in Methane Dehydro-Aromatization over Mo/HZSM-5 Catalyst

Carbonaceous Deposition on Mo/HMCM-22 Catalysts for Methane Aromatization: A TP Technique Investigation

Dealumination Kinetics of Composite ZSM-5/mordenite Zeolite During Steam Treatment: an In-Situ DRIFTS Study

Investigation into the coking-related key reaction steps in dry reforming of methane over NiMgO x catalyst

Three-step short-time temperature-programmed hydrothermal synthesis of ZSM-5 with high durability for conversion of methanol to propylene

Chemical Imaging of Carbide Formation and Its Effect on Alcohol Selectivity in Fischer Tropsch Synthesis on Mn-Doped Co/TiO2 Pellets

Chemical imaging of Fischer-Tropsch catalysts under operating conditions