Abstract:This study details the promoting effects that SO42− has on a NiMo/γ-Al2O3 catalyst prepared using NiSO4 (CAT-Sulf) as a nickel precursor, compared with the Ni(NO3)2 (CAT-Nit) and the industrial NiMoP-complex (CAT-NiP) after 600 °C calcination. The three catalysts were characterized by virtue of X-ray diffraction (XRD), thermogravimetry mass spectrometry (TG-MS), N2 adsorption–desorption, hydrogen temperature programmed reduction (H2-TPR), X-ray photoelectron spectroscopy (XPS) and high-resolution transmission electron microscopy (HRTEM). Hydrodesulfurization (HDS) activity was assessed using dibenzothiophene (DBT) as the feedstock. On the one hand, compared with CAT-Nit, the SO42− anions could be anchored on the catalyst surface due to their thermal stability and strong interaction with Al2O3, while few NO3− anions could be found. These anchored SO42− anions weaken the metal–support interaction and hinder the formation of NiAl2O4, thereby facilitating both the sulfidation of Mo species and the decoration of Ni atoms and generating more Ni–Mo–S active sites. On the other hand, compared with CAT-NiP, the residual SO42− anions do not impair the support properties and CAT-Sulf maintains excellent textural structure, i.e. high specific surface area and a proper pore structure. Therefore, CAT-Sulf exhibits the highest dibenzothiophene hydrodesulfurization (DBT-HDS) activity out of the three catalysts. Moreover, these anchored SO42− anions effectively hinder the aggregation and growth of the active phases, thus guaranteeing a catalyst with high metal dispersion and good stability. Finally, using the inferior residual oil as a feedstock, the stability of CAT-Sulf was also assessed compared with an industrial catalyst (CAT-Ref), and the results show that during 1500 h on stream, its HDS ratio is maintained at around 78%, while that of the industrial catalyst (CAT-Ref) declined from ca. 82% to ca. 71% after 1200 h, indicating that CAT-Sulf exhibits much better stability and shows excellent industrial potential. The anchored SO42− anions simultaneously endow the NiSO4-derived catalyst with excellent physical structure, high intrinsic activity and good stability, indicating that it might be a simple and effective method to balance the activity and stability of the HDS catalyst using thermostable nickel precursor salts.

Effects of Fe species on promoting the dibenzothiophene hydrodesulfurization over the Pt/γ-Al2O3 catalysts

The Effect of Hydrophobically Modified Iron Catalysts with Hexadecyltrimethoxysilane on Fischer‐Tropsch Synthesis

Catalytic Combustion of Biodiesel Wastewater over the Fe2O3 Catalyst Coupled with a Pt-based Catalyst

Silica improved formation of Fe(III)-S and electron-deficient effect in Fe-based catalysts to improve hydrodesulfurization

Promoting Propane Dehydrogenation with CO 2 over the PtFe Bimetallic Catalyst by Eliminating the Non-selective Fe(0) Phase

Effects of Sm on Fe–Mn Catalysts for Fischer–Tropsch Synthesis

Performance of V-Fe based catalysts on the oxidation of dibenzothiophenes

Effects of the Ratio of Fe to Co over Fe-Co/SiO2 Bimetallic Catalysts on Their Catalytic Performance for Fischer-Tropsch Synthesis

Non-equilibrium electronic structure of Fe-based bulk catalysts: Dual-channel electron transfer behavior among Fe, Zn, and P species and its impact on hydrodesulfurization reaction pathway

Enhanced Catalytic Performance over Fe2O3-doped Pt/SO42 −/zro2 in N-Heptane Hydroisomerization

Preparation of Fe2P/Al2O3 and FeP/Al2O3 Catalysts for the Hydrotreating Reactions

Synergistic Catalysis of a PtFe-Alloyed Structure on W 18 O 49 for Boosted Sulfide Oxidation

A novel preparation strategy for an oil-soluble catalyst in slurry phase hydrocracking: Synergistic effect and electronic regulation of Fe on MoS 2

Sulfur-resistance iron catalyst in sulfur-containing VOCs abatement modulated through H2 reduction

Analysis of CO Catalytic Oxidation by Pt-loading Catalyst and Ce-doped Fe2O3

Promoting effects of SO42− on a NiMo/γ-Al2O3 hydrodesulfurization catalyst

Dehydrogenation Improvement Of Lialh4 Catalyzed By Fe2o3 And Co2o3 Nanoparticles

Activation Temperature Study of Precipitated Fe/Sio2 Catalyst for Fischer-Tropsch Synthesis

Coating Pd/Al 2 O 3 Catalysts with FeO X Enhances Both Activity and Selectivity in 1,3-Butadiene Hydrogenation

The Enhanced SO2 Resistance of Fe-Ti Catalyst by W/SO42- Co-Modification for NH3-SCR: A Combined Experimental and DFT Study

Optimizing the Catalytic Activity of Flame‐spray‐pyrolyzed Pt/Fe2O3 Catalyst Toward CO Oxidation: Effect of Fluorination and Reduction