Abstract:Fischer-Tropsch synthesis is an important way to replace crude oil resources to sustainable energy in the future, and an important process for catalytic conversion of syngas into clean fuel and high value-added chemicals. Iron-based catalysts have been widely used in industrial production due to their advantages of low cost, flexible operation and water-gas conversion activity. However, the phase change of iron-based catalysts during the reaction process is very complex. As many as seven iron species including elemental iron and different types of iron oxide iron carbide are considered to have Fischer-Tropsch synthesis activity. It is very important to understand the evolution of iron species and their roles in the reaction for clarifying the structure-activity relationship of catalysts and designing efficient industrial catalysts. Hematite Fe 3 O 4 is often used as the precursor oxide of iron based catalyst, which is converted into iron carbide during the reaction process. It is often considered as an inactivated phase and has high water-gas conversion activity, leading to high CO 2 selectivity. Wang et al prepared Fe 3 O 4 catalyst by using metal organic framework（MOF） as precursor, which would be converted into Fe 3 O 4 @Fe 5 C 2 during the reaction process. Therefore, the author believed that Fe 5 C 2 phase was the key to the catalyst activity. Herein, We used graphene as the support and used the classic preparation method of supported catalyst-impregnation method to prepare iron-based catalyst with different loading capacity. The Fe 3 O 4 particles were grown by calcinating at high temperature to prevent excessive carbonization in the reaction process, and the properties of Fe 3 O 4 phase were investigated. The results of reaction performance test show that Fe 3 O 4 species itself has a certain activity of CO hydrogenation, and the carbonization process of large Fe 3 O 4 particles（＞200 nm） in the reaction process will be inhibited to a certain extent. With the increase of reaction time, part of Fe 3 O 4 is carbonized into iron carbide, and the catalyst activity increases, indicating that the activity of iron carbide species is higher than that of Fe 3 O 4 .

Effects of surface hydrophobization on the phase evolution behavior of iron-based catalyst during Fischer–Tropsch synthesis

The Effect of Hydrophobically Modified Iron Catalysts with Hexadecyltrimethoxysilane on Fischer‐Tropsch Synthesis

Stabilizing the Active Phase of Iron-Based Fischer–Tropsch Catalysts for Lower Olefins: Mechanism and Strategy

Inhibiting water-gas-shift reaction in the Fischer–Tropsch synthesis: Unraveling the roles of phase and facet over iron carbides

Synthesis of Iron-Carbide Nanoparticles: Identification of the Active Phase and Mechanism of Fe-Based Fischer–Tropsch Synthesis

Development of an Iron-Based Fischer—Tropsch Catalyst with High Attrition Resistance and Stability for Industrial Application

Superhydrophobic Surface Modification of a Co-Ru/SiO2 Catalyst for Enhanced Fischer-Tropsch Synthesis

The application of DFT calculation in the study of iron-based catalyst for Fischer-Tropsch synthesis

Shielding the Hägg Carbide by a Graphene Layer for Ultrahigh Carbon Efficiency During Syngas Conversion

A DFT study towards dynamic structures of iron and iron carbide and their effects on the activity of the Fischer–Tropsch process

Selective fabrication of χ-Fe5C2 by interfering surface reactions as a highly efficient and stable Fischer-Tropsch synthesis catalyst

Supported Fe2C catalysts originated from Fe2N phase and active for Fischer-Tropsch synthesis

Hydrophobic Fe‐Based Catalyst Derived from Prussian Blue for Enhanced Photothermal Conversion of Syngas to Light Olefins

Effect of Graphitic Carbon Modification on the Catalytic Performance of Fe@SiO2-GC Catalysts for Forming Lower Olefins Via Fischer-Tropsch Synthesis.

Preparation of Graphene-Supported Fe3O4 Model Catalysts for Fischer-Tropsch Synthesis

Atomically Defined Iron Carbide Surface for Fischer–Tropsch Synthesis Catalysis

Research Progress on the Effects of Support and Support Modification on the FTO Reaction Performance of Fe-Based Catalysts

Iron oxide nanoparticles supported on pyrolytic graphene oxide as model catalysts for Fischer Tropsch synthesis

Promotive effect of boron oxide on the iron-based catalysts for Fischer-Tropsch synthesis

Facet sensitivity of iron carbides in Fischer-Tropsch synthesis

Atomic-scale understanding of the impact of CoO phase in cobalt-catalyzed fischer-tropsch synthesis: A combined computational and experimental study