Abstract:Continuous SiC fiber is a kind of high–performance ceramic fiber that combines many advantages, such as high strength, high modulus, high hardness and low density. It has excellent mechanical properties, high–temperature and oxidation resistance, which could be applied as essential reinforcement in advanced ceramic matrix composites (CMCs) in the fields of aerospace and advanced weaponry. Melt–spinnable polytitanocarbosilane (PTCS) is an important precursor, which can be used to prepare continuous SiC fibers through a precursor–derived method. In this work, low–softening–point polycarbosilane (LPCS) and tetrabutyl titanate were used to prepare polytitanocarbosilane with a ceramic yield of 67.5 wt% at 1000 °C. FT–IR, TGA, GPC, 1H NMR, 29Si NMR, and elemental analysis were used to analyze the composition and structure of the PTCS precursor. Finally, Si–C–Ti–B fibers with an average tensile strength of 1.93 GPa were successfully prepared by melt spinning, pre–oxidation, pyrolysis, and high–temperature sintering of the PTCS precursor. The strength retention rates were 71.5% and 79.8% after heat treatment at 1900 °C and 2000 °C under an argon atmosphere for 1 h, respectively. The strength retention rates of Si–C–Ti–B fibers are higher than those of commercial Hi–Nicalon fibers, Tyranno ZMI fibers and Hi–Nicalon S fibers. This work can lay a theoretical foundation and technical support for developing high-performance SiC ceramic fibers containing titanium and their ceramic matrix composites.

Preparation and Characterization of Polymer-Derived Si-B-N-C Fibers

Preparation of high performance Si-B-N ceramic fibers by polymer derived method

SiC Nanograins Stabilized Si–C–B–N Fibers with Ultrahigh‐temperature Resistance

Preceramic polymer for SiBNC fiber via one-step condensation of silane, BCl<sub>3</sub>, and silazane

Synthesis of Polytitanocarbosilane and Preparation of Si–C–Ti–B Fibers

Boron-carbon doped Silicon Carbide Fibers: Preparation and Property

Preparation of Hollow Si-B-N Ceramic Fibers by Partial Curing and Pyrolysis of Polyborosilazane Fibers

Fine-diameter Si–B–C–N ceramic fibers enabled by polyborosilazanes with N–methyl pendant group

Preparation and properties of SiC nanocrystallite reinforced amorphous Si-B-C-N ceramics

Characterization and Microstructural Evolution of Continuous BN Ceramic Fibers Containing Amorphous Silicon Nitride

Amorphous Fine-Diameter SiC-based Fiber from a Boron-Modified Polytitanocarbosilane Precursor

Performance and Structure of Polymer Derived SiBCN Ceramics

RESEARCH PROGRESS OF POLYMER DERIVED ENGINEERING CERAMICS

Advances in Polymer-Derived Boron-Containing Continuous Silicon Carbide Fibers

Boron nitride nanosheets composite SiC fibers with enhanced mechanical properties and high‐temperature resistance

Preparation And Characterization Of Polymer-Derived Sibonc Bulk Ceramics By Polymer-Drived Precursor Method

Polymer-derived SiBN Fiber for High-Temperature Structural/functional Applications.

High-temperature Oxidation Induced Layering Process for Si–C–B–N Ceramic Fibers with SiC Nanograins

Properties and Applications of Polymer-Derived Continuous SiC Fibers

ADVANCES IN THE POLYMER-DERIVED SiC FIBERS INCLUDING HETERO-ELEMENT

Synthesis and Characterization of Silicon-containing Polyborazine to Boron Nitride Ceramic Fiber