Abstract:Continuous SiC fiber is a kind of high–performance ceramic fiber that combines many advantages, such as high strength, high modulus, high hardness and low density. It has excellent mechanical properties, high–temperature and oxidation resistance, which could be applied as essential reinforcement in advanced ceramic matrix composites (CMCs) in the fields of aerospace and advanced weaponry. Melt–spinnable polytitanocarbosilane (PTCS) is an important precursor, which can be used to prepare continuous SiC fibers through a precursor–derived method. In this work, low–softening–point polycarbosilane (LPCS) and tetrabutyl titanate were used to prepare polytitanocarbosilane with a ceramic yield of 67.5 wt% at 1000 °C. FT–IR, TGA, GPC, 1H NMR, 29Si NMR, and elemental analysis were used to analyze the composition and structure of the PTCS precursor. Finally, Si–C–Ti–B fibers with an average tensile strength of 1.93 GPa were successfully prepared by melt spinning, pre–oxidation, pyrolysis, and high–temperature sintering of the PTCS precursor. The strength retention rates were 71.5% and 79.8% after heat treatment at 1900 °C and 2000 °C under an argon atmosphere for 1 h, respectively. The strength retention rates of Si–C–Ti–B fibers are higher than those of commercial Hi–Nicalon fibers, Tyranno ZMI fibers and Hi–Nicalon S fibers. This work can lay a theoretical foundation and technical support for developing high-performance SiC ceramic fibers containing titanium and their ceramic matrix composites.

ADVANCES IN THE POLYMER-DERIVED SiC FIBERS INCLUDING HETERO-ELEMENT

RESEARCH PROGRESS OF POLYMER DERIVED ENGINEERING CERAMICS

Synthesis of Polytitanocarbosilane and Preparation of Si–C–Ti–B Fibers

Research Progress on Microstructure Characterization of Silicon Carbide Fibers

SiC fibers with different diameters exhibiting excellent high-temperature resistance and oxidation resistance

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Fine-diameter Si–B–C–N ceramic fibers enabled by polyborosilazanes with N–methyl pendant group

Progress of silicon carbide fibers and their application to ceramic matrix composites

Processing, microstructure, and mechanical properties of chopped SiC fibers reinforced ZrB2–hBN–based composites

Preparation of silicon-nitride ceramic fibers with hafnium compounds loaded on the surface and the high temperature properties

Study on the Mechanical Property of High‐Performance Silicon Carbide Fiber

The fiber structure evolution and performance changes of SiC–ZrC fibers after 1600 °C heat treatment

Flexible and thermally stable SiC fiber mats derived from electrospun boron-doped polyaluminocarbosilane precursors

Superparamagnetic Silicon Carbonitride Ceramic Fibers Through In Situ Generation of Iron Silicide Nanoparticles During Pyrolysis of an Iron-Modified Polysilazane

High-temperature resistance and thermal insulation performance of continuous SiMOC ceramic fibers fabricated by the modified sol-gel method combined with dry spinning

Multifunction properties of SiOC reinforced with carbon fiber and in-situ SiC nanowires

Boron nitride nanosheets composite SiC fibers with enhanced mechanical properties and high‐temperature resistance

Fabrication and Characterization of ZrO_2/SiC Composite Materials

Effect of SiC on the anti-ablation resistance and flexural strength of (Hf-Ta-Zr)C-C/C composites

Boron-carbon doped Silicon Carbide Fibers: Preparation and Property

Synthesis of cyano-polycarbosilane and investigation of its pyrolysis process