Abstract:The surface and core are composed of heterogeneous fiber materials that are endowed with excellent properties due to the unique structure. In this work, polysiloxane (PSZ) was used as the ceramic precursor and hafnium carbide (HfC) was used as the hafnium source, and Si–N–C–O-Hf hybridized ceramic fibers were obtained using electrostatic spinning and pyrolysis. After the primary fibers were pyrolyzed at 1400 °C, hemispherical particles were found on the surface of the ceramic fibers. And the average fiber diameters were around 3 μm. Thermogravimetric analysis (TGA) showed that the mass of the cured fibers decreased to 67 % below 1650 °C in an argon atmosphere. The mass of the ceramic fibers remained almost unchanged in the high temperature aerobic environment. Meanwhile, the thermal conductivity of the specimens has remained relatively low. Analytical tests confirmed that the hafnium-containing hemispherical protective layer gave the specimens excellent thermal stability, oxidation resistance, and high temperature insulation. In addition, the excellent mechanical properties make it suitable for a wide range of applications. The optimized high-temperature performance and mechanical properties indicate that metal-hybridized silicon-based ceramic fibers herein are suitable for ultra-high-temperature environments.

Preparation of Hollow Si-B-N Ceramic Fibers by Partial Curing and Pyrolysis of Polyborosilazane Fibers

Preparation of high performance Si-B-N ceramic fibers by polymer derived method

Preparation of Boron Nitride Ceramic Fibers by Pyrolysis of Silicon-containing Polyborazine

A Novel Polyborosilazane for High-Temperature Amorphous Si–B–N–C Ceramic Fibres

Preparation and Characterization of Polymer-Derived Si-B-N-C Fibers

Fine-diameter Si–B–C–N ceramic fibers enabled by polyborosilazanes with N–methyl pendant group

Synthesis and Characterization of Silicon-containing Polyborazine to Boron Nitride Ceramic Fiber

Preceramic polymer for SiBNC fiber via one-step condensation of silane, BCl<sub>3</sub>, and silazane

Characterization and Microstructural Evolution of Continuous BN Ceramic Fibers Containing Amorphous Silicon Nitride

Preparation of silicon-nitride ceramic fibers with hafnium compounds loaded on the surface and the high temperature properties

Preparation Of Sibnc Ceramics By Polymer Pyrolysis

Amorphous Fine-Diameter SiC-based Fiber from a Boron-Modified Polytitanocarbosilane Precursor

Preparation of silicon nitride fibers by pyrolysis nitridation of polycarbosilance

Preparation of Polymer-Derived Boron-Containing Silicon Carbide Fibers

A Simple and Efficient Method for the Synthesis of SiBNC Ceramics with Different Si/B Atomic Ratios

Flexible and thermally stable SiC fiber mats derived from electrospun boron-doped polyaluminocarbosilane precursors

Preparation And Properties Of Silica Fiber Reinforced Dielectric Ceramic Matrix Composites

Synthesis and Structural Characterization of SiBOC Ceramic Fibers Derived from Single-Source Polyborosiloxane

Preparation and properties of SiC nanocrystallite reinforced amorphous Si-B-C-N ceramics

Synthesis and characterization of polyborosilazane as novel precursor to SiBNC ceramic

SiC Nanograins Stabilized Si–C–B–N Fibers with Ultrahigh‐temperature Resistance