Abstract:One prerequisite for the large-scale application of biodegradable polymers is the manipulation of macroscopic performances of commercially available biopolymers during processing according to different real service requirements. Herein, the microstructural evolution of poly(butylene adipate-co-butylene terephthalate) (PBAT) modified by chain extender during film blowing was investigated by in situ synchrotron radiation X-ray scattering to unveil the origin of different performances. The chain dynamics difference induced by the chain extender was first characterized by the rheological measurement and 1H Multiple Quantum (MQ) NMR. It shows that the terminal relaxation is significantly slowed down, while the locally segmental dynamics is not apparently changed. With the assistance of the custom-built film blowing apparatus, the microstructure right above the die exit (D = 13-165 mm) was in situ, simultaneously captured by small- and wide-angle scattering (SAXS/WAXS), where four distinct regimes can be defined. Only the PBAT melt signals are found in regime I, whereas the formation of the mesomorphic domains as shown by the SAXS streaks appearing in regime II. The crystal shows up in regime III, where the WAXS signal appears. A dramatic increment of the crystallinity is found in regime III, which contributes to the continuous increasing bubble modulus with the formation of the crystal-based network. Such a crystal-based network is filled with crystals in regime IV, where the diameter of the PBAT bubble remains constant. The addition of the chain extender is found to significantly influence the structural evolution within different regimes. These dynamics and structure information could supply general guidance for bubble stability improvement and modification of macroscopic performances of biodegradable polymer products.

Chain extension of biodegradable aliphatic/aromatic copolyester by reactive extrusion chain extension of poly(butylene terephthalate-co-butylene)

Synthesis and Thermomechanical and Rheological Properties of Biodegradable Long-Chain Branched Poly(Butylene Succinate-Co-Butylene Terephthalate) Copolyesters

Synthesis And Properties Of Long Chain Polyesters From Biobased 1,5-Pentanediol And Aliphatic Alpha,Omega-Diacids With 10-16 Carbon Atoms

Effect of chain extender on the morphological, rheological and mechanical properties of biodegradable blends from PBAT and P34HB

Chain Extension Of Poly(Butylene Terephthalate) By Reactive Extrusion

Impacts of chain extenders on thermal property, degradation, and rheological performance of poly(butylene adipate-co-terephthalate)

Manipulation of Chain Entanglement and Crystal Networks of Biodegradable Poly(butylene Adipate-Co-butylene Terephthalate) During Film Blowing Through the Addition of a Chain Extender: an in Situ Synchrotron Radiation X-ray Scattering Study.

Effect of Chain Extension on Processability and Mechanical Properties of Poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate)

Effect of Carbon Black and Chain Extender on Thermal, Rheological and Mechanical Properties of Fully Biodegradable Poly(butylene Adipate‐co‐terephthalate)/poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) Blends

Effect of Copolymerized Butylene Terephthalate Chains on Polymorphism and Enzymatic Degradation of Poly(Butylene Adipate)

Preparation, mechanical, and thermal properties of biodegradable polyesters/poly(lactic acid) blends

Highly Enhanced Mechanical Strength and Toughness of Biodegradable PBAT Plastics Through a Biobased Multiple Hydrogen Bonding Strategy

Effect of chain extender on morphologies and properties of PBAT/PLA composites

Catalyzed Chain Extension of Poly(butylene Adipate) and Poly(butylene Succinate) with 2,2′‐(1,4‐Phenylene)‐bis(2‐oxazoline)

Chain Extension of Polyester PBT with Epoxide Resin

Fabrication and Properties of Modified Poly(butylene Terephthalate) with Two‐Step Chain Extension

Chemical Recycling of Poly(butylene Terephthalate) into Poly(ethylene Brassylate-Co-butylene Terephthalate) with Tunable Thermal, Mechanical and Biodegradable Properties

Effect of Chain Extender on Hydrogen Bond and Microphase Structure of Biodegradable Thermoplastic Polyurethanes

Chain Extension of Adipic Acid and (or) Succinic Acid/butanediol Polyesters with 2,2′‐(1,4‐phenylene)‐bis(2‐oxazoline) and Adipoylbiscaprolactamate Combined Chain Extenders

Enhanced degradation and gas barrier of PBAT through composition design of aliphatic units

Branching and Cross-Linking of Poly(ethylene Terephthalate) and Its Foaming Properties