Abstract:When HVDC system operates in monopolar mode and uses the earth as a return path,the electrode current with the magnitude of several kiloamperes can cause significant potential difference between different locations.Meanwhile,there may be direct currents flowing through the power transformers with neutral points grounded,which results in a series of harmful consequences.Under heavy saturation due to DC bias,lots of magnetic flux will be pushed out of the iron core and pass through leakage paths consisting of insulation media and metal parts.Taking the example of a simplified power system with a 105 MVA/220 kV three-phase three-limb transformer,some simulation results regarding the estimation of Manapouri transformer performance for no load case when HVDC earth return current is presented.Instead of using either a branch impedance or an admittance matrix to represent the iron core of transformer,the coupled electromagnetic method based on the core topology is adopted and a three-phase three-limb transformer model has been established.It can represent transformer characteristics very accurately with properly decided parameters.In this model, the loop equations which relate the loop flux to the externally applied magnetomotive forces with reluctances as coefficients are obtained.The effects of transformer leakage paths are modelled by constant magnetic reluctances and discussed in detail.The results with different magnitudes of these leakage reluctances show that the characteristics of leakage paths would influence the immunity of three-phase three-limb transformer from DC biasing current.Since such type of transformer will also be affected by DC biasing current when the reluctances of leakage paths are not large enough,the leakage paths should be considered carefully during the design and manufacture of power transformer.

Research And Design Of The Neutral Series Resistor To Restrain The Hvdc Ground Current Flowing Into Transformer

Applying Series Resistor to Restrain Power Transformer DC Biasing

Study on Restraining DC Neutral Current of Transformer During HVDC Monopolar Operation

Measures to Restrain the Neutral Current of the AC Transformer in HVDC Ground Return System

Grounding Methods of Multi-Terminal VSC-HVDC System Based on Modular Multi-level Converter

Design and Field Application of DC and Harmonic Suppression System for Neutral Current in 220 kV Substation

Restriction on Secondary Arc Current on Ultra-high Voltage AC Double Circuit Transmission Lines on the Same Tower

Research on Overvoltage Suppression by Blocking Diode and DC Circuit Breaker in LCC-VSC Hybrid HVDC System.

Research of neutral grounding modes for 20kV distribution network

Research of Neutral Grounding Modes for 20 Kv Distribution Network

Study on Neutral-Bus Overvoltage Mechanism of ±500 Kv DC Power Transmission Project from Tianshengqiao to Guangdong

Analysis of Application of 500 kV Transformer with Low Reactance Grounding

Research on Neutral Point Grounding via Resistance for 66 kV Distribution Network

Neutral-Point Voltage Regulation and Control Strategy for Hybrid Grounding System Combining Power Module and Low Resistance in 10 kV Distribution Network

Influence and Characteristics Analysis of Effect Of the HVDC Ground Return Current on AC System

Study of the Influence of UHVDC Systems Shared Grounding Electrode on the Environment

Research on the Withstand Performance of Three-phase Three-limb Power Transformer under DC Current Biasing

Research on setting calculation of zero sequence directional overcurrent protection for 110 kV neutral point grounding via resistance system

Study and design of main circuit parameters for ±800 kv/7500 MW DC power transmission project from Xiluodu to Zhexi

Mitigation Strategy of Neutral-Point DC for Transformer Caused by Metro Stray Currents

A Comprehensive Coupled Methodology for Calculation and Suppression of DC Bias in UHVDC Transmission Systems