Abstract:Parabolic trough collector is an up-and-coming technology for urban energy supply. To further enhance the optical-thermal efficiency of the collector, a modified receiver enhanced by solar and hot mirrors was proposed. In this receiver, two symmetrical solar mirrors were designed to collect more solar irradiance, and a transparent hot-mirror shield was employed to lessen the thermal loss. After the design, the collector performance was studied by developing an optical-thermal coupled model. Based on the model, firstly, the proposed receiver was compared with the conventional receiver and two existing modified receivers. Results indicate the proposed receiver can achieve an optical efficiency of 78.02%, which is higher than those of the existing modified receivers and is just 0.22% lower than that of the conventional one. Moreover, compared with the conventional receiver, the two existing modified receivers cannot improve the optical-thermal efficiency at sufficiently high direct normal irradiance or relatively low fluid temperature, which can be overcome by the proposed receiver. Furthermore, compared with the conventional receiver, the proposed receiver can lessen the thermal loss by 11.2–89.6 W·m−1, thus improving the receiver efficiency and the optical-thermal efficiency by 0.03–5.26% and 0.03–4.70%, respectively, under the typical ranges of the inlet temperature (573–823 K) and the direct normal irradiance (0.3–1 kW·m−2). Then, parameter analysis indicates the hot mirror with low emissivity is necessary for efficiently improving the optical-thermal efficiency. Finally, the proposed receiver can improve the optical-thermal efficiency more effectively at higher fluid temperature or larger coating emissivity. The above results signify that the proposed receiver can be helpful for enhancing the efficiency of the trough collector.

Study On Trough Receiver For Linear Concentrating Solar Collector

An experimental investigation on thermal and optical analysis of cylindrical and conical cavity copper tube receivers design for solar dish concentrator

Experimental Investigation and Analysis on a Parabolic Trough Solar Collector Using Triangle Cavity Receiver

Design and Optimization of Cavity Solar Collector

Experimental and Theoretical Analysis on a Linear Fresnel Reflector Solar Collector Prototype with V-shaped Cavity Receiver

THEORETICAL ANALYSIS OF HEAT REMOVAL FACTOR OF LINEAR CONCENTRATING SOLAR COLLECTOR USING CAVITY RECEIVER

Design, Simulation and On-Sun Experiments of a Modified Sliding-Bed Particle Solar Receiver for Coupling with Tower Concentrating System

Thermal Performance Analysis of A Line-Focus Fresnel Lens Solar Collector Using Different Cavity Receivers

Design and Optimization of Elliptical Cavity Tube Receivers in the Parabolic Trough Solar Collector

An optimized model and test of the China’s first high temperature parabolic trough solar receiver

Performance Investigation on Solar Thermal Conversion of A Conical Cavity Receiver Employing A Beam-Down Solar Tower Concentrator

Experimental Investigation of Thermal Performance Enhancement of Cavity Receiver with Bottom Surface Interior Convex

Theoretical and Experimental Study on Solar Thermal Mechanism of A Point-Line-Coupling-Focus System Employing Linear Fresnel Reflector

Cavity receiver designs for parabolic trough collector

Parabolic Trough Collector with Internal Fractal Fins in Receiver to Increase Thermal Performance in Working Fluid

Theoretical and Experimental Analysis on Efficiency Factors and Heat Removal Factors of Fresnel Lens Solar Collector Using Different Cavity Receivers

Thermal performance analysis of a novel Conical-Cylindrical-Conical cavity receiver for a Scheffler concentrated solar system

Performance Investigation on a Linear Fresnel Lens Solar Collector Using Cavity Receiver

Efficiency enhancement of a solar trough collector by combining solar and hot mirrors

ANALYSIS AND OPTIMIZATION OF TRIANGULAR CAVITY RECEIVER IN PARABOLIC TROUGH COLLECTOR

Thermal performance analysis of eccentric double-selective-coated parabolic trough receivers with flat upper surface