Abstract:The cavity receiver's thermal conversion performance is critical for parabolic dish and tower Concentrated Solar Power (CSP) systems. Distinct from precedent research aiming to increase the receiver's absorption through cavity geometry optimization, the objective of this work was to investigate the thermal conversion performance of a novel, positive conical cavity receiver design, following the heat loss reduction approach with simplified pipe forming, to stress the effectiveness of this approach in cavity receiver design, and to provide data for future optimization of the proposed design. To accomplish these goals, the novel receiver and existing designs' heat flux absorption and heat loss are compared numerically. The resulting conversion power is also experimentally validated. The concept is inspired by analysis of formulas, suggesting the novel design may realize a thermal conversion improvement of 8.6%, at 650 K, and increases with the rise in temperature. The comprehensive numerical investigation combines ray tracing of identical incoming radiation to investigate the receiver absorption and CFD methods to investigate the cavities' heat loss at identical temperatures. The absorption acquired is unoptimized. The novel design can reduce the heat loss by as much as 91.8% when compared with a negative conical design at 650 K, resulting in a 12.3% improvement in conversion power. The experimental investigation measures the energy conversion to the working fluid in different cavities under identical incoming radiation. The novel receiver outperforms by over 5.6% in the setup. After correcting boundary conditions using experiment measurements, the experimental and numerical results are comparable. This research proves that the novel positive conical receiver has a better thermal conversion performance over 650 K; thus, the heat loss reduction approach is effective and feasible in receiver designs within this temperature range.

Cavity receiver designs for parabolic trough collector

Spectral-spatial Design and Coupling Analysis of the Parabolic Trough Receiver

Study On Trough Receiver For Linear Concentrating Solar Collector

An optimized model and test of the China’s first high temperature parabolic trough solar receiver

Parabolic Trough Collector with Internal Fractal Fins in Receiver to Increase Thermal Performance in Working Fluid

Parametric analysis of small scale cavity receiver with optimum shape for solar powered closed Brayton cycle applications

Design and Optimization of Elliptical Cavity Tube Receivers in the Parabolic Trough Solar Collector

An experimental investigation on thermal and optical analysis of cylindrical and conical cavity copper tube receivers design for solar dish concentrator

Influence of geometric design variables on the performance of a novel V-shaped cavity receiver

Numerical investigation to optimize the modified cavity receiver for enhancement of thermal performance of solar parabolic dish collector system

Heat Loss Reduction Approach in Cavity Receiver Design Based on Performance Investigation of a Novel Positive Conical Scheme

Experimental Investigation and Analysis on a Parabolic Trough Solar Collector Using Triangle Cavity Receiver

Energy and exergy studies on the receiver models with materials and heat transfer fluids

Thermal performance analysis of eccentric double-selective-coated parabolic trough receivers with flat upper surface

Energetic and Exergetic Analyses on Structural Optimized Parabolic Trough Solar Receivers in a Concentrated Solar–thermal Collector System

ANALYSIS AND OPTIMIZATION OF TRIANGULAR CAVITY RECEIVER IN PARABOLIC TROUGH COLLECTOR

Computational comparison of a novel cavity absorber for parabolic trough solar concentrators

Efficiency enhancement of a solar trough collector by combining solar and hot mirrors

Performance Enhancement of Parabolic Trough Collector by Using Homogenizer and Spiral

Inferences on the effects of geometries and heat transfer fluids in multi-cavity solar receivers by using CFD

Energy Advantages and Thermodynamic Performance of Scheffler Receivers as Thermal Sources for Solar Thermal Power Generation