Abstract:In this paper, a trough black body cavity receiver for linear concentrating collector, which has potential application at moderate working temperatures (near 100 degrees C) or higher temperature (above 1.80 degrees C), has been studied. Four different shapes of the receiver have been proposed and tested. The optical efficiencies of the four receivers are simulated by using light tracking method. The thermal performances of the cavity receivers are tested under temperature levels, 90 degrees C and 150 degrees C, where the concentrated solar radiation is simulated by electric heating film. Both optical and thermal analysis illustrates that the triangle trough receiver is the best choice. To reduce the thermal losses, three kinds of glass cover are fixed on the cavity receiver. The thermal losses of the three different receivers with glass cover have been tested, when the inlet temperature varies from 35 degrees C to 95 degrees C. The experimental results indicate that the glass cover can reduce the thermal losses effectively. The semicircular cavity is tested in an linear concentrating solar collector, in which the sunlight is concentrated by a linear Fresnel lens(aperture width is 0.4m and optical efficiency is 0.7) and scatters on the semicircular cavity wall, absorbed by the copper tube and transmitted to working fluid. The highest average efficiency can reach 43% when the inlet temperature of the working fluid is 90 degrees C. It is found from experimental results that the efficiency of this designed cavity receiver is a little lower than that of evacuated tube, but has good potential in application because it is cheap and can be manufactured easily.

ANALYSIS AND OPTIMIZATION OF TRIANGULAR CAVITY RECEIVER IN PARABOLIC TROUGH COLLECTOR

Experimental Investigation and Analysis on a Parabolic Trough Solar Collector Using Triangle Cavity Receiver

THEORETICAL ANALYSIS OF HEAT REMOVAL FACTOR OF LINEAR CONCENTRATING SOLAR COLLECTOR USING CAVITY RECEIVER

Study On Trough Receiver For Linear Concentrating Solar Collector

An optimized model and test of the China’s first high temperature parabolic trough solar receiver

Performance Simulation of a Parabolic Trough Solar Collector

Experimental Investigation of Thermal Performance Enhancement of Cavity Receiver with Bottom Surface Interior Convex

INVESTIGATION INTO OPTICAL PERFORMANCE ANALYSIS AND OPTIMIZATION OF PARABOLIC TROUGH CPV COLLECTOR

Design and Optimization of Elliptical Cavity Tube Receivers in the Parabolic Trough Solar Collector

An experimental investigation on thermal and optical analysis of cylindrical and conical cavity copper tube receivers design for solar dish concentrator

Study on the Optical Properties of Triangular Cavity Absorber for Parabolic Trough Solar Concentrator

Energetic and Exergetic Analyses on Structural Optimized Parabolic Trough Solar Receivers in a Concentrated Solar–thermal Collector System

Optimum design and experimental study of small parabolic trough solar receiversmall trough type solar collector

Spectral-spatial Design and Coupling Analysis of the Parabolic Trough Receiver

Thermal performance analysis of eccentric double-selective-coated parabolic trough receivers with flat upper surface

Performance Investigation of Parabolic Trough Solar Receiver

Performance Enhancement of Parabolic Trough Collector by Using Homogenizer and Spiral

Parabolic Trough Collector with Internal Fractal Fins in Receiver to Increase Thermal Performance in Working Fluid

Influence of geometric design variables on the performance of a novel V-shaped cavity receiver

Optical analysis and optimization of parabolic dish solar concentrator with a cavity receiver

A Detailed Parameter Study on the Comprehensive Characteristics and Performance of a Parabolic Trough Solar Collector System