Abstract:To reduce the environment pollution from biolubricant synthesis, in this study, we developed a green and efficient strategy for the preparation of octylated branched biolubricant from waste cooking oil (WCO): (1) WCO was first hydrolyzed by a lipase (Candida sp. 99–125) to produce unsaturated fatty acids (UFAs), the latter was subsequently concentrated by urea complexation; (2) Next, we synthesized new esters using the UFAs as substrate via esterification with 2-ethylhexanol employing lipase (Novozym 435) and the new esters products were further epoxidated; (3) After that, the epoxy group was attacked by a low-cost nucleophilic reagent, octanoic acid, to prepare octylated branched biolubricant using an recyclable ionic liquid, [HMIm][PF6], as catalyst. After three recycling times, [HMIm][PF6] remained catalytic activity with a conversion yield of 81.22% and selectivity of 82.10%. The obtained product showed excellent lubricant properties, such as low pour point of -61 oC, high viscosity index of 149 and high thermal-oxidation stability (onset temperature of 326.35 oC and oxidative onset temperature of 312.06 oC). The high frequency reciprocating rig (HFRR) measurement demonstrated that lubrication performance (friction coefficient of 0.09 and wear spot diameter of 203 μm) was much better than that of mineral based lubricant with the same viscosity grade. Therefore, this study provided a critical synthetic strategy for preparing high-performance biolubricants from WCO.

Commercial experiment of synthesis of 8b and 20# aviation engine oils

Direct Production of Aviation Fuel Range Hydrocarbons and Aromatics from Oleic Acid Without an Added Hydrogen Donor

Preparation of Α-Olefins Through the Steam Cracking Process of Wax from Coal Liquefaction

Synthesis of Poly Alpha Olefins Using Alpha Olefins Obtained from the Steam Cracking Process of Coal Liquefaction Wax

Study on Synthesis and Application of Poly Alpha Olefins Based on Alpha Olefins Produced from Coal Liquefied Wax Cracking Process

Synthesis of low pour point bio-aviation fuel from renewable abietic acid

Real-time oxidation and coking behavior of ester aviation lubricating oil in aircraft engines

Study on Preparation of Fuel Oil from Three Kinds of Molecular Sieve Catalytic Cracking Waste Lubricating Oil

Catalytic synthesis of renewable lubricant base oils with methyl oleate and aromatics

Fischer-Tropsch wax catalytic cracking for the production of low olefin and high octane number gasoline: Experiment and molecular level kinetic modeling study

An experimental study on optimization utilization of deasphalted oil

Synthesis and Viscosity Ruducing Ability of SL Series Tercopol ymers of Long Chain Alkyl Acrylate for Extra-Heavy Crude Oils

Advances in Fischer-Tropsch wax hydrocracking process

Fatty acid wax from epoxidation and hydrolysis treatments of waste cooking oil: synthesis and properties

The Effect of Additional Zeolites in Amorphous Silica–Alumina Supports on Hydrocracking of Semirefined Paraffinic Wax

Study on hydroformylation synthesis of higher alcohol with olefins from paraffin cracking

Study on the technology of thermal cracking of paraffin to alpha olefins

Green preparation of branched biolubricant by chemically modifying waste cooking oil with lipase and ionic liquid

Synthesis and properties of wax based on waste cooking oil

Diester Derivatives from Chemically Modified Waste Cooking Oil As Substitute for Petroleum Based Lubricating Oils

A Pilot Plant on Study of Solvent Dewaxing