Abstract:The precipitation of wax at low temperature often leads to the viscosity increase of waxy crude oil, and even causes the blockage of pipelines in severe cases. The addition of polymer additives is an effective method for inhibiting wax precipitation. In the present work, poly(styrene-octadecyl acrylate)s with low crosslinking density were prepared through microemulsion polymerization, with styrene and octadecyl acrylate as monomers and N -(hydroxyethyl) acrylamide (NMA) as the crosslinking agent. The chemical structures and molecular weights of polymers were characterized by Fourier transform infrared spectroscopy and gel permeation chromatography, respectively. The crosslinking densities (CLD) of polymers were determined in the range of 1.32 × 10 −4 to 4.66 × 10 −4 cm 3 /mol by the dissolution equilibrium method. Waxy model oils were prepared to explore the crosslinked polymers on the wax crystallization behaviors by using X-ray diffraction (XRD) approaches and isothermal crystallization kinetics (ICK). As the CLD of polymers increases to 1.99 × 10 −4 cm 3 /mol, the crystallinity index (CI), grain size, and structural strength of the wax crystals decrease. However, as the CLD of polymers is further increased to 4.66 × 10 −4 cm 3 /mol, all of the above parameters increase, due to the deterioration of the co-crystallization ability of polymers. In the ICK tests, The Avrami index n of the model oil samples increases from 1.94 to 2.43 as the CLD increases, implying that the nucleation effect of polymers is increased. The effect of CLD on the cold flowability of Inner Mongolia crude oil was investigated by pour point test, rheology, differential scanning calorimeter (DSC), and polarized light microscopy (PLM). The results show that the pour point, viscosity, yield stress, thixotropic ring area, cumulative wax precipitation and wax crystal size of the crude oil decrease when the CLD of polymers increases to 1.99 × 10 −4 cm 3 /mol. However, if the CLD is further increased to 4.66 × 10 −4 cm 3 /mol, all of the parameters increase. Consequently, the mechanism for the improvement of waxy crude oil by mildly crosslinked polymer is proposed.

Study on Synthesis and Application of Poly Alpha Olefins Based on Alpha Olefins Produced from Coal Liquefied Wax Cracking Process

Effects of Aluminoxane Cocatalysts on Bis(imino)pyridine Iron‐catalyzed Ethylene Oligomerization

Study of the structure–activity relationship of metallocene-catalysed poly-α-olefin (mPAO) base oil

Synthesis and Performance Evaluation of Metallocene Polyalphaolefins (mPAO) Base Oil with Anti-Friction and Anti-Wear Properties

Study on Preparation Process of Lubrication from 1-Decene with Acidic Ionic Liquid Catalyst

Effect of Aluminoxane on Molecular Weight and Molecular Weight Distribution of Polyethylene Prepared by an Iron‐based Catalyst

Synthesis and Characterization of Α,ω-Bis(2,6-dimethylphenol)-poly(2,6-dimethyl-1,4-phenylene Oxide) Oligomers in Water and the End-Group Modification

Double Alkyl Chain Copolymers As Flow Improvers for Heavy Oil

Synthesis and performance of olefin copolymers produced with monocyclopentadienyl titanium phosphinimide complex as viscosity modifiers

Experimental Study on Thermal Oxidation Dynamics of Lubricating Base-oil PAO

High-Pressure Rheological Properties of Polyalphaolefin and Ester Oil Blends and Their Impact on Lubrication

Fischer-Tropsch wax catalytic cracking for the production of low olefin and high octane number gasoline: Experiment and molecular level kinetic modeling study

Enhancement of cold flowability for high waxy crude oil by the mildly crosslinked poly(styrene-octadecyl acrylate)

Enhancing light olefins and aromatics production from naphthenic-based vacuum gas oil: Process integration, techno-economic analysis and life cycle environmental assessment

Enzyme-catalyzed preparation of polyol ester lubricants and performance research-based on pelargonic acid, oleic acid and trimethylolpropane

High-quality petroleum-like fuels and/or profitable value-added platform chemicals manufactured via a solid acid-catalyzed two-stage fast oil shale pyrolysis

Chemical Conversion of Fischer–Tropsch Waxes and Plastic Waste Pyrolysis Condensate to Lubricating Oil and Potential Steam Cracker Feedstocks

Synthesis of poly(1,2-butylene oxide-stat-tetrahydrofuran) by controllable polymerization over Sc(OTf)3 for use in high-performance lubricating oil

Recovery Utilization of Triolein for Producing Short Chain Alkane by Combining Biocatalysis and Inorganic Catalysis

Kaolin-based Catalyst As a Triglyceride FCC Upgrading Catalyst with High Deoxygenation, Mild Cracking, and Low Dehydrogenation Performances

Asphaltene Inhibition and Flow Improvement of Crude Oil with a High Content of Asphaltene and Wax by Polymers Bearing Ultra-Long Side Chain