Abstract:Anti-wear and anti-oxidation abilities are two key properties of lubricants that play a crucial role in ensuring long-term stable equipment operation. In this study, we aimed to develop a base oil with good anti-oxidation and anti-wear properties for use under extreme pressure. The as-prepared metallocene polyalphaolefin (mPAO) was chemically modified using the trifluoromethanesulfonic acid (TfOH) catalysis through an alkylating reaction with triphenyl phosphorothioate (TPPT). During the experiments, when the reaction temperature exceeded 70 °C or the concentration of TfOH exceeded 2.67%, the β-scission reaction in the alkylation process became significantly more pronounced. The physical and chemical properties of TPPT-modified mPAO (T-mPAO) were evaluated by nuclear magnetic resonance spectroscopy, Fourier trans-form infrared spectroscopy, gel–permeation chromatography, and ASTM standards. T-mPAO showed significantly improved antioxidant capacity, with the initial oxidation temperature increasing by 32 °C compared to the base oil, and it exhibited the slowest increase in acid number in the 96-h oven oxidation test. The tribological tests showed that T-mPAO had the lowest friction coefficient, wear track, and wear rate (72.7% lower than that of mPAO) as well as the highest PB (238 kg) and PD (250 kg) among all tested samples. Compared to mPAO, the average friction coefficient of TPPT-modified mPAO in the four-ball friction test was reduced by 30.5%, and by 16.4% in the TE77 reciprocating friction test. Based on the experimental results, T-mPAO had strong anti-oxidation ability and excellent lubricating performance.The successful synthesis of multifunctional mPAO has enabled lubricant base oil additization, making it possible to use it in more demanding work scenarios, greatly broadening its application scope and making lubricant formulation blending more flexible.

Experimental Study on Thermal Oxidation Dynamics of Lubricating Base-oil PAO

STUDY ON THERMAL OXIDATION STABILITY OF PAO BASE-OIL

SYNERGISTIC EFFECT OF ORGANIC MOLYBDATE ESTER AND ARYLAMINE ANTIOXIDANT IN SYNTHETIC LUBRICANTS

Synthesis and Performance Evaluation of Metallocene Polyalphaolefins (mPAO) Base Oil with Anti-Friction and Anti-Wear Properties

The Mechanism of Thermal Oxidation of a Hydrotreated Naphthenic Lube Base Oil at High Temperature

Oxidation degradation analysis of antioxidant added to CTL base oils: experiments and simulations

Real-time oxidation and coking behavior of ester aviation lubricating oil in aircraft engines

Study on the relationship between high temperature oxidation and temperature rise rate of engine oil

Antioxidation Synergistic Effect of Arylamine with ZDDP

Effect of Alkylated Diphenylamine on Thermal-Oxidative Degradation Behavior of Poly- Α -Olefin

Synergistic antioxidation properties of organic molybdate ester with dibutyldithiocarbamate

Thermal Oxidation Mechanism of Polyalphaolefin Greases with Lithium Soap and Diurea Thickeners: Effects of the Thickener

Exploration on the Synergistic Effect of Antioxidants for Coal-to-liquid Base Oil: from the Perspective of Oxidation Resistance and Thermal Stability

Study On Antioxidation Properties Of The Complex Of Dithiocarbamate With Tolutriazole Antioxidant

Investigating the Impact of Phenolic Antioxidants on the Oxidation Stability of Synthetic Ester Insulating Oil

Thermal Conductivity Calculation in Organic Liquids: Application to Poly-α-Olefin

Experimental Investigation of Lubrication Failure of Polyalphaolefin Oil Film at High Slide/Roll Ratios

Study of the structure–activity relationship of metallocene-catalysed poly-α-olefin (mPAO) base oil

Study on the Mechanisms of the Lubricating Oil Antioxidants: Experimental and Molecular Simulation

Thermal decomposition kinetics and anti-oxidation performance of commercial antioxidants

Tribological Performance Study of Oil‐soluble ILs As Lubricant Additives by the Four‐ball Method