Abstract:The optimal design of variable section is a flow field optimization method that changes the pressure of the reacting gas in the flow channel by setting up a contraction surface in the flow channel, which is effective in improving many aspects of the proton exchange membrane fuel cell (PEMFC) performance. However, there are also problems such as uneven oxygen distribution in some of the flow channels, and the current density and net output power are not significantly improved. To find a balance among gas transfer efficiency, drainage capacity, uniformity of current density distribution, and output performance, this paper investigates the design of a variable cross-section-enhanced mass transfer flow field for PEMFC flow channel contraction by establishing a three-dimensional numerical model, starting from the sidewall width direction and the bottom height direction of the flow channel cross-section dimensions, in order to assess the effects of variable cross-section contraction at the bottom and sidewalls of the flow channel on the cell performance. The polarization curves, mass transfer capacity, current density distribution, and net output power of the variable cross-section contraction flow field are analyzed and compared with the straight flow field. On this basis, the optimum size parameters and operating parameter combinations are determined. Variable cross-sectional contraction flow field improves PEMFC output performance. The contraction of the variable cross-section contraction flow field at the sidewalls effectively improves reactive gas transfer efficiency and drainage capacity, improves current density distribution, and increases the net output power of the PEMFC. In particular, the sidewall contraction flow field has a 9.0% increase in power density, a 6.45% increase in the effective mass transfer coefficient (EMTC), a 6.52% increase in uniformity of current density distribution, and a 6.05% net power increment compared to the straight flow field, respectively. The best output performance, the highest oxygen concentration, and the lowest water concentration are achieved with a combination of parameters: number of sidewall contractions N = 6 , length L f = 6 mm , and width W f = 1.2 mm . And a wide range of air stoichiometry ratios are applied when the contraction of the variable cross-section contraction flow field is located at the sidewalls. Increasing the cathode stoichiometry ratio from 10 to 50 increased the cell power density by 25.5% and from 50 to 90 increased the cell power density by 9.5%. The simulation results can provide theoretical basis for the application of variable section flow field design for practical PEMFC.

Experimental study of the effect of different oxidant on PEMFC performance

In-Depth Understanding of Oxygen Transfer in the Catalyst Layer of High-Temperature Proton Exchange Membrane Fuel Cells

Effect of oxidant quantity and humidification temperature on performance of PEMFC with twin inlet and twin outlet flow field

Experimental Analysis of Optimal Performance for a 5 Kw PEMFC System

Evaluation of performance and mass transfer characteristics by applying oblique fin flow field to air-cooled PEMFCs under different ambient conditions

Experimental and Numerical Investigation on Effects of Cathode Flow Field Configurations in an Air-Breathing High-Temperature PEMFC

The Performance Improvement of Membrane and Electrode Assembly in Open-Cathode Proton Exchange Membrane Fuel Cell

Experimental Investigation on the Open Cathode Air-Cooled Proton Exchange Membrane Fuel Cells: Optimum Operating Parameters and Control Strategies

Optimization of control strategy for air-cooled PEMFC based on in-situ observation of internal reaction state

Effect of air depletion in the preferential oxidation reactor and fuel depletion in a proton exchange membrane fuel cell system fueled by natural gas

Preparation and Characterization of Carbon-supported MnOx-Pt Catalyst for PEMFC

Operation parameters study on the performance of PEMFC based orthogonal test method

Multi-objective optimization and evaluation of PEMFC performance based on orthogonal experiment and entropy weight method

Study on the influence of the hydrogen–oxygen stoichiometric ratio on the power performance improvement in a large-scale PEMFC stack

Experimental Study on the Dynamic Performance of a Proton Exchange Membrane Fuel Cell

Influence of cathode air supply mode on the performance of an open cathode air-cooled proton exchange membrane fuel cell stack

The Optimization of PEM Fuel Cell Performance Using the CFD Method Combined with Experimental Validation

Numerical Study on the Influence of Variable Section-Enhanced Mass Transfer Flow Field Design on PEMFC Performance Based on Underrib Convection Flow

An Experimental Study on the Performance of Automotive PEMFC Under Typical Conditions

Heat and Mass Transfer Performance of Proton Exchange Membrane Fuel Cells with Electrode of Anisotropic Thermal Conductivity

Improved flow field design for air-cooled proton exchange membrane fuel cells