Abstract:Utilization of fuel cells as a source of driving power would expose them to dynamic variable loading conditions depending on the driving profile and environmental circumstances. The present research study aims to investigate the dynamic behavior of a single‐cell proton exchange membrane fuel cell (PEMFC) subjected to various loading modes and operation parameters. A fuel cell with hydrogen gas as fuel has been assembled as the test module. Three different voltage load modes were designed and applied to the cell. The corresponding current variation of the cell as its dynamic response was measured. The dynamic behavior of the cell was examined for various control parameters such as the cell working temperature, inlet humidification temperature, and stoichiometry. The experimental results indicated that the working temperature of 65°C provided the best fuel‐cell performance among the three investigated working temperatures of 45°C, 55°C, and 65°C. At different humidification temperatures, the Ta/Tc = 70°C/60°C humidification condition led to the best fuel cell performance due to the adequate wettability of the membrane. However, the humidification temperature might also have induced a minimal impact on the dynamic response of the fuel cell. Although past studies have indicated that higher stoichiometry achieved better cell performance, the experimental data of this study demonstrated that the cell performance of λa/λc = 1.5/2.0 was better than λa/λc = 1.0/1.0 or 3.0/3.0. The influence of the load modes on the performance of the fuel cell was distinguished when the load was high and driving load changed rapidly. Thus, in the present study, the dynamic behavior of a single cell has been investigated and the outcomes can be directly employed for validation of future theoretical models.

Experimental Study on the Dynamic Performance of a Proton Exchange Membrane Fuel Cell

Analysis of Proton Exchange Membrane Fuel Cell reactant gas dynamic response and distribution quality

In-Depth Understanding of Oxygen Transfer in the Catalyst Layer of High-Temperature Proton Exchange Membrane Fuel Cells

The Performance Improvement of Membrane and Electrode Assembly in Open-Cathode Proton Exchange Membrane Fuel Cell

Experimental investigation of dynamic performance and transient responses of a kW-class PEM fuel cell stack under various load changes

Effect of flow channel shapes of proton exchange membrane fuel Cell on its performances

Effects of operating parameters and load mode on dynamic cell performance of proton exchange membrane fuel cell

Dynamic Performance of a High-Temperature PEM Fuel Cell – an Experimental Study

Experimental Investigation on the Open Cathode Air-Cooled Proton Exchange Membrane Fuel Cells: Optimum Operating Parameters and Control Strategies

Analytical and Experimental Investigations of A Proton Exchange Membrane Fuel Cell

Illustrative Case Study on the Performance and Optimization of Proton Exchange Membrane Fuel Cell

Dynamic Response During PEM Fuel Cell Loading-up

Effects of Three-Dimensional Type Flow Fields on Mass Transfer and Performance of Proton Exchange Membrane Fuel Cell

Effects of Dynamic Changes in Inlet Temperature on Proton Exchange Membrane Fuel Cell

Reaction Gas Pressure, Temperature, and Membrane Water Content Modulate Electrochemical Process of a PEMFC: A Simulation Study

Synergistic mass transfer and performance stability of a proton exchange membrane fuel cell with traveling wave flow channels

A Coupled CFD Model for an Accurate and Fast Prediction of the Unsteady Operation Process of a Proton Exchange Membrane Fuel Cell

Experimental study on the dynamic response of voltage and temperature of an open-cathode air-cooled proton exchange membrane fuel cell

Optimization strategies to mitigate reactant starvation in a dead-ended hydrogen–oxygen proton exchange membrane fuel cell during cyclic loading

Experimental and Numerical Simulation Study of Oxygen Transport in Proton Exchange Membrane Fuel Cells at Intermediate Temperatures (80 °C–120 °C)

Numerical Study of Porous Flow Field Designs for Proton Exchange Membrane Fuel Cells