Abstract:Narrow channel heat exchange technology is one of the key technologies for the development of integrated small modular reactors (SMR). The 'wall heat flux partitioning' (WHFP) model in conjunction with an Eulerian-Eulerian Multiphase Flow (EEMF) method is found to be an important tool for two-phase hydrothermal analysis. In this paper, the accuracy of the EEMF-WHFP method with various sub-models is systemically evaluated over a large database of boiling flows in narrow rectangular channels. Prediction results using a total of 9 model combinations, are compared with data from 22 experimental conditions covering a range of the mass flux of 134.2 to 2200 kgm-2s-1, the inlet fluid subcooling of 7.2 to 74.2 K, the pressure of 0.1 to 14 MPa and the heat flux of 9.54 to 1700 kWm-2 in narrow rectangular channels with gaps of 1.0 to 3.0 mm. The evolution of distributions of void fraction, wall temperature and the net vapor generation (NVG) point along the flow channel is simulated and compared with experimental data. It is found that due to the limitation of the range of applicability of sub-models, certain models produced better prediction results under different pressure ranges than others, and the recommended combinations are given according to the quantitative assessments. In addition, the ability of the model combinations to predict the NVG point, as well as the flow structure and boiling process in narrow channels is investigated. The critical local void fraction near the wall at the NVG point is quantitatively estimated based on numerical results. The research conclusions in this paper can be used in thermal-hydraulic calculations in a wide range of operating pressures covering the applications of compact heat exchangers, flat plate fuels, climbing/falling film plate evaporators and the cooling of microelectronics, among other applications.

Research of Determinant Law of Boiling Heat Transfer Enhancement in Rectangular Narrow Channel

Numerical Study on Effect of Gap Width of Narrow Rectangular Channel on Critical Heat Flux Enhancement

Effect of Gap Width of Rectangular Narrow Channel on Heat Transfer Enhancement

Analytical Model Study Of Critical Heat Flux In Rectangular Narrow Channel

Analysis Model of Critical Heat Flux in Rectangular Narrow Channels

Theoretical study on the characteristics of critical heat flux in vertical narrow rectangular channels

Experimental investigation and a mechanical model of critical heat flux in a narrow rectangular channel

Theoretical Calculation Of The Critical Heat Flux In Annular Upward Flow In Vertical Narrow Rectangular Channels

Theoretical Investigation on Critical Heat Flux of Annular Flow in Narrow Annular Channel

Flow boiling heat transfer characteristics and mechanism analysis of high-pressure water in parallel twin narrow rectangular channels

Experimental Study on the Heat Transfer of Water Boiling Flow in Narrow Horizontal Rectangular Channels

Experimental Study on Thermal-Hydraulic Performance of Single-Phase Water Flow in Narrow Rectangular Channel

Theoretical analysis of the characteristics of critical heat flux in vertical narrow rectangular channels under motion conditions

A Critical Heat Flux Model for Unilateral Heating Rectangular Narrow Channel

Experimental Study on Heat Transfer of Single-Phase Flow and Boiling Two-Phase Flow in Vertical Narrow Annuli

Experimental Study on Flow Patterns in Narrow Rectangular Channels

Natural convective boiling in vertical rectangular narrow channels

Experiment study of flow boiling heat transfer characteristics in horizontal rectangular channel

Two-Phase Flow and Boiling Heat Transfer in Two Vertical Narrow Annuli

Study on Application of Two-Fluid Model in Narrow Annular Channel

Numerical Investigation of Flow Boiling Characteristics in Narrow Rectangular Channels Using Two-Fluid Eulerian Cfd Model Covering a Wide Range of Pressures