Abstract:Saturated flow boiling experiments were conducted to investigate the influence of surface wettability on the hydraulic and thermal transport performance in a large width-to-height aspect ratio, one-sided heated rectangular microchannel with deionized water as the working fluid. The contact angles of the bare silicon wafer surface and superhydrophilic surface after deposited by a thin film of 100-nm-thickness silicon dioxide were 65 3 and less than 5 respectively, both of which were utilized as heated surfaces of the microchannel. Parametric experimental studies were carried out with the inlet vapor quality varied from 0.03 to 0.1 and the wall heat fluxes spanned from 4 W/cm(2) to 20 W/cm(2), at various mass fluxes ranging from 120 to 360 kg/m(2) s. High speed flow visualizations were conducted coupled with instrumental measurements to illustrate the effects of heat flux, mass flux and two phase inlet quality on the local heat transfer coefficient, averaged heat transfer performance, two phase flow structure and pressure drop characteristics for surfaces with distinct surface wettability characteristics in the microchannel. Experimental results showed that the local heat transfer coefficient decreased first until approaching a minimum value and then increased towards the exit along the flow direction. Severe heat transfer deterioration was obtained for the bared silicon wafer surface with increased inlet vapor quality and heat flux, resulting from the local dryout phenomenon as can be verified by the flow visualization. While the heat transfer performance of the superhydrophilic surface was relatively constant due to continuous and uniform distribution of the thin liquid film on the heated surface during annular flow dominance and subsequent delay to partial dryout occurrence, which outperformed the untreated hydrophilic surface without additional pressure drop penalty. (C) 2017 Elsevier Ltd. All rights reserved.

THE EFFECT OF CHANNEL HEIGHT ON FLOW BOILING HEAT TRANSFER AND CHF IN FLAT MINICHANNELS WITH LOCAL HEATING

Theoretical and Experimental Research on Flow Boiling Heat Transfer in Microchannels for IGBT Modules

Flow Boiling Heat Transfer Intensification Due to Inner Surface Modification in Circular Mini-Channel

Influence of the Surface Enhancement on the Flow Boiling Heat Transfer in a Minichannel

Local Heat Transfer of Saturated Flow Boiling in Vertical Narrow Microchannel

Heat Transfer Characteristics And Flow Pattern Visualization For Flow Boiling In A Vertical Narrow Microchannel

Effects of Heat Flux, Mass Flux, Inlet Fluid Subcooling, and Channel Orientation on Subcooled Flow Boiling in a High-Aspect-Ratio Rectangular Microchannel

Flow Boiling Heat Transfer in A Minichannel with Enhanced Heating Surface

Investigation of flow boiling critical heat flux and heat transfer within a horizontally oriented channel with one-sided heating at three levels of subcooled inlet

Natural convective boiling in vertical rectangular narrow channels

Experimental investigation and a mechanical model of critical heat flux in a narrow rectangular channel

Local Heat Transfer in Subcooled Flow Boiling in a Vertical Mini-Gap Channel

Experimental Study on Local Subcooled Flow Boiling Heat Transfer in A Vertical Mini-Gap Channel

Investigation on visualization and heat transfer performance study of the mini-channel flow boiling

The use of enhanced surface in flow boiling heat transfer in a rectangular minichannel

Effects of Heat Flux, Mass Flux and Two-Phase Inlet Quality on Flow Boiling in a Vertical Superhydrophilic Microchannel

Subcooled flow boiling in ultrahigh-aspect-ratio microchannels for high heat flux cooling

Experimental investigation on heat transfer of subcooled flow boiling of water in mini channels under high heat fluxes

Numerical simulation of boiling behavior in vertical microchannels

Experimental Study Of Saturated Flow Boiling In Vertical Narrow Microchannel