Abstract:The ultimate goal of an advanced turbocharger development is to have a superior aerodynamic performance while having the turbocharger survive various real world customer applications. Due to the uncertainty of customer usage and driving pattern, the fatigue life prediction is considered one of the most ambiguous analyses in the entire design and analyses processes of the turbocharger. The turbocharger system may have various resonant frequencies, which may be within the range of turbocharger operation for automotive applications. A turbocharger may operate with excessive stresses when running near resonant frequencies. The turbocharger may experience fatigue failures if the accumulative cycles of the turbocharger running across the resonant frequencies exceeds a certain limit. In this study, the authors propose an alternative approach to mitigate this kind of fatigue issues: i.e. engine system approach to improve turbocharger fatigue life via avoiding operating the turbocharger near resonant speeds for extended period of time. A preliminary numerical study was made and presented in this paper to assess the feasibility of such an engine system approach, which is followed by an engine dynamometer test for engine performance sensitivity evaluation when the turbocharger operation condition was adjusted to improve the high cycle fatigue life. The study shows that for a modern diesel engine equipped with electrically controlled variable geometry turbine and EGR for emission control, through the engine calibration and control upgrade, turbocharger operation speed can be altered to stay away from certain critical speeds if necessary. The combined 1D and 3D numerical simulation shows the bandwidth of the turbine “risk zone” near one of the resonant speeds and the potential impact on engine performances if the turbocharger speed has to be shifted out of the “risk zone.”

Adaptive Method for Turbocharger Revolution Speed Measurement

Method and Implement of Measuring the Revolution Speed with Data Acquisition Card

The adaptive filtering of engine transient rotating speed signals

Research on the Online Measurement of Automobile Engine Speed Based on Vibration Analysis

A Novel Method to Improve the Precision of BTT under Rapid Speed Fluctuation Conditions

Diesel Engine Turbocharger Monitoring by Processing Accelerometric Signals through Empirical Mode Decomposition and Independent Component Analysis

Instantaneous Rotating Speed Estimation Using Adaptive Short-time Chirp-Fourier Transform and Its Applications

A Method for Estimating the Transient Response Time of Turbochargers

Failure Analysis and Optimization of the Rotor System in a Diesel Turbocharger for Rotor Speed-Up Test

Adaptive Simulation of Turbofan Engine Component Performance

Development of an Advanced Turbocharger Simulation Method for Cycle Simulation of Turbocharged Internal Combustion Engines

Application of Variable-Frequency Technology to Turbocharger Test

Enhanced algorithm for predictive maintenance to detect turbocharger overspeed in diesel engine rail vehicles

Design of In-Cycle Speed Fluctuation Measurement System for High-Speed Gasoline Engines

Foundation Excitation Idetification of Turbocharger's Vibration Response Based on Frequency Response Function Inversion Method

A performance degradation evaluation method for a turbocharger in a diesel engine

A comprehensive aerodynamic-thermal-mechanical design method for fast response turbocharger applied in aviation piston engines

A Methodology for Measuring Turbocharger Adiabatic Maps in a Gas-Stand and Its Usage for Calibrating Control Oriented and One-Dimensional Models at Early ICE Design Stages

Non-Contact High-Frequency Vibration Measurement Using Blade Tip Vibration Acceleration

A Motor-rotating-speed Measuring Method Based on TMS320F2812

An Engine System Approach to Improve Turbocharger Fatigue Life