Typical Fault Modeling and Vibration Characteristics of the Turbocharger Rotor System
Jiahao Wang,Huabing Wen,Haiyu Qian,Junhua Guo,Junchao Zhu,Jiwei Dong,Hua Shen
DOI: https://doi.org/10.3390/machines11020311
IF: 2.899
2023-02-21
Machines
Abstract:To study the typical failure mechanism (rotor unbalance, rotor friction, and rotor crack) and vibration characteristics of the turbocharger rotor system, a rotor system dynamics simulation model was established by an improved four-node aggregate parameter method. The geometric and physical characteristics of the rotor system under three failure states and its dynamics under operation were analyzed. Thus, a typical failure dynamics simulation model of the rotor system was established. On this basis, the output failure simulation signal was extracted using the Hu invariant moment feature extraction method to analyze the system vibration characteristics under each typical failure state of the rotor system. The results show that the model in this paper can effectively reduce the computational volume and computational time, and the errors of numerical simulation were less than 3%. When an unbalance fault occurred in the rotor system, the shaft trajectory was "0" shaped and the response spectrum was dominated by 1X. When the rotor system was frictional, the shaft trajectory was a slightly concave "8" shape, and the response spectrum was dominated by 0.5X. When the rotor system was cracked, the axial trajectory was a "vortex", and the response spectrum was dominated by 0.5X. Thus, the study of typical failure mechanism and vibration characteristics of a turbocharger rotor system by simulation calculation is effective and has good research prospects, providing an important technical reference for dynamic analysis and fault diagnosis of the rotor system.
engineering, mechanical, electrical & electronic