Abstract:Obtaining the best operating parameters of the internal combustion engine has focused the attention of designers and researchers since the first years of its creation. Initial research focused on increasing engine power and overall efficiency. As time passed, these aspirations became more sophisticated and began to concern other operating parameters of the drive unit. The basic problem, however, remained the improvement of filling the cylinder with the working medium. Turbocharger charging consists in using the energy of the exhaust gases to drive a turbine placed on a common shaft with a compressor supplying air under increased pressure to the cylinders. Over time, the turbocharger became one of the key elements and its technical condition began to play a key role in the operation and performance of modern drive units. Like every element, the turbocharger itself is not without its faults. This procedure is known among manufacturers who, when designing power units and their assemblies, pay special attention to the essence of turbocharger construction. Since it is impossible to predict all the phenomena accompanying a working turbocharger at the design stage, the authors of this paper conducted bench tests of a selected batch of turbochargers, focusing mainly on the vibration measurements of the turbocharger rotating assembly. At the same time, we present a dynamic model of the mentioned system based on the analyses resulting from the solutions of the equations of a numerical model. In order to give the research a practical aspect, the results of the theoretical research were compared with the results of bench tests. It has been shown that the basic problem is to guarantee the correct operating parameters of the bearings in the position of static and dynamic equilibrium. Obtaining such operating parameters requires finding a compromise solution, e.g., between the maximum temperature in oil films and the amplitudes of vibration accelerations in bearing nodes. The research results presented in the article can be used as a field for further discussion in the field of research on the reliability of turbochargers and be helpful in the design process in order to avoid design errors and reduce production costs.

Dynamic stability analysis of a high-speed diesel engine turbocharger subjected to aerodynamic loads and engine-induced vibration

Dynamic and stability comparison analysis of the high-speed turbocharger rotor system with and without thrust bearing via machine learning schemes

Dynamic characteristics of high-speed gasoline engine turbocharger based on thermo-elasto-hydrodynamic lubrication bearing model and flexible multibody dynamics method

Effect of rotating unbalance and engine excitations on the nonlinear dynamic response of turbocharger flexible rotor system supported on floating ring bearings

Investigation of Weight Effects on the Critical Speed of Inclined Turbocharger Rotor System

The Influence of Ring-Speed Ratio Dynamic Change on Nonlinear Vibration Response of High-Speed Turbocharger Rotor System

Dynamics and stability analysis of unbalance responses in mid‐positioned electrically assisted turbocharger rotor

Nonlinear Dynamic Analysis of High Speed Oil-Free Turbomachinery With Focus on Stability and Self-Excited Vibration

Dynamic Analysis of Turbocharger Rotor Bearing with an Integrated Three Dimensional Thermohydrodynamic Model

Vibration characteristics of a high-speed turbocharger rotor with mass unbalance based on simulation and experiment

Effects of unbalance orientation on the dynamic characteristics of a double overhung rotor system for high-speed turbochargers

Structural Dynamics and Aeroelasticity of Airborne Diesel Engine Turbochargers

Coupling nonlinear dynamics and multi-objective optimization for periodic response and reduced power loss in turbochargers with floating ring bearings

Improving Vibration Response of Radial Turbine in Variable Geometry Turbochargers With CFD Analysis

Effect of the inlet oil temperature on vibration characteristics of the high-speed turbocharger rotor system

Reduced-Order Modeling of Extreme Speed Turbochargers

The prediction of the non-linear dynamics of a squeeze-film damped aero-engine rotor housed in a flexible support structure

Influence of External Clearance Variation on Vibration Characteristics of Ship Electrically Assisted Turbocharger Rotor Bearing System

Evaluation of Selected Dynamic Parameters of Rotating Turbocharger Units Based on Comparative Model and Bench Tests

Failure Analysis and Optimization of the Rotor System in a Diesel Turbocharger for Rotor Speed-Up Test

A General Approach to Tune the Vibration Properties of the Mounting System in the High-Speed and Heavy-Duty Engine