Abstract:The problem of local and weak defect detection in rotating machinery has been widely studied in many literatures. Its vibration signal is not easy to be recognized in the raw signal owing to its low energy level at the early stage of the fault and strong background noise. An early developed and still widely used technique for such a signal detection is envelope analysis. Despite the fruitful modifications and improvements on this technique, its effectiveness and application is still limited by its parameter selection, which is generally understood as the optimization on the structure and the parameters of the filter that are hardly ever known a priori. To solve this problem, this paper focuses on the adaptive selection of the filter parameters, i.e. the center frequency and the band width. By analyzing the energy distribution in frequency domain of the vibration signal, the center frequency is automatically determined by identifying the frequency with the maximal energy; and then, by comparing the energy changes of two adjacent windows and merging these windows if the changes are small enough, the appropriate band width is selected according to the window with the concentrated energy. An experimental vibration signal collected from a bearing with an outer race defect is used to verify the effectiveness of the proposed filter. A comparison between the proposed method and the fast kurtogram is also completed. The results indicate that the proposed filter can quickly identify the resonance frequency band induced by the faulty bearing and then extract weak transient signal for accurate fault diagnosis.

The adaptive filtering of engine transient rotating speed signals

Instantaneous Rotating Speed Estimation Using Adaptive Short-time Chirp-Fourier Transform and Its Applications

Rotating High-Frequency Voltage Injection Based on Characteristic Harmonic Elimination

Adaptive Simulation of Turbofan Engine Component Performance

Engine Misfire Detection Using Crankshaft Speed Multiple Filtering

Adaptive Method for Turbocharger Revolution Speed Measurement

Research on the Online Measurement of Automobile Engine Speed Based on Vibration Analysis

Time-frequency Post-Processing Method Based on Generalized S-transform and Its Application to Aero Engine Rotor System Fault Diagnosis

An analysis of vehicle engine vibration signals with digital order tracking approaches

An Improved Blade Tip-timing Method for Vibration Measurement of Rotating Blades During Transient Operating Conditions

Noise Analysis and Compensation of Momentary Crankshaft Speed of Automotive Engines

Design of Band-Filter Based on Multiple Tracking-Differentiators and Indicated Torque Reconstruction of Diesel Engine

A Frequency-Shift Synchrosqueezing Method for Instantaneous Speed Estimation of Rotating Machinery

Time–Frequency Postprocessing Method Based on Generalized S-Transform and Its Application to Aeroengine Rotor System Fault Diagnosis

Improvement of BTT Precision Considering Transient Rotating Speed Fluctuations

Early Detection Of Signal Transients Using A Hybrid Signal Processing Method For Gearbox Fault Diagnosis

Extraction of Weak Transient Signals Based on Adaptive Window Merging for Rolling Bearing Fault Diagnosis

Study of Time-Frequency Order Tracking of Vibration Signals in Engine Speed Changing Stage

Multiscale Filtering Reconstruction for Wind Turbine Gearbox Fault Diagnosis Under Varying-Speed and Noisy Conditions

A fast filtering method based on adaptive impulsive wavelet for the gear fault diagnosis

A Modified Tacho-Less Order Tracking Method for the Surveillance and Diagnosis of Machine under Sharp Speed Variation