Abstract:A piezoresistive pressure sensor with a beam-membrane-dual-island structure is developed for micro-pressure monitoring in the field of aviation, which requires great sensitivity and overload resistance capacity. The design, fabrication, and test of the sensor are presented in this paper. By analyzing the stress distribution of sensitive elements using the finite element method, a novel structure incorporating sensitive beams with a traditional bossed diaphragm is built up. The proposed structure proved to be advantageous in terms of high sensitivity and high overload resistance compared with the conventional bossed diaphragm and flat diaphragm structures. Curve fittings of surface stress and deflection based on ANSYS simulation results are performed to establish the sensor equations. Fabricated on an n-type single crystal silicon wafer, the sensor chips are wire-bonded to a printed circuit board (PCB) and packaged for experiments. The static and dynamic characteristics are tested and discussed. Experimental results show that the sensor has a sensitivity as high as 17.339 μV/V/Pa in the range of 500 Pa at room temperature, and a high overload resistance of 200 times overpressure. Due to the excellent performance, the sensor can be applied in measuring micro-pressure lower than 500 Pa.

Design of a novel silicon piezoresistive flow sensor

Design of a novel 2-D silicon piezoresistive flow sensor

Initial approach for all optical type silicon micro-mechanical flow sensor

Design of a Novel Silicon Capacitive Flow Sensor

A Micromachined Single-Crystal Silicon Flow Sensor with a Cantilever Paddle

A self-bended piezoresistive microcantilever flow sensor for low flow rate measurement

Design, Fabrication, Testing and Mechanical Analysis of Bulk-Micromachined Flowmeters

Design, Simulation and Fabrication of a Micromachined Cantilever-Based Flow Sensor

Design and Fabrication of a Miniature Four-Axial Piezoresistive Force/Torque Sensor with MEMS Technology

The Novel Structural Design for Pressure Sensors

A MEMS-based Air Flow Sensor with a Free-standing Micro-cantilever Structure

A Novel 2-D Capacitive Silicon Flow Sensor

Design and development of MEMS based beam-membrane structure flow sensor

A Novel Piezoresistive Sensitive Structure for Micromachined High-Pressure Sensors.

The Design and Optimization of a Highly Sensitive and Overload-Resistant Piezoresistive Pressure Sensor.

A Novel Pressure Microsensor with 30- $\mu \Hbox{m}$-Thick Diaphragm and Meander-Shaped Piezoresistors Partially Distributed on High-Stress Bulk Silicon Region

A Monolithic Piezoresistive Pressure-Flow Sensor with Integrated Signal-Conditioning Circuit

A piezoresistive pressure sensor with improved sensitivity in low pressure condition

Design and Fluid–structure Interaction Analysis of a Micromachined Cantilever-Based Differential Pressure Flow Sensor

A microcantilever-based gas flow sensor for flow rate and direction detection

Fabrication and Calibration of Directionally-Resolved Micropillars Using Off-the-Shelf Piezoresistive Dies